Enter At Command Mode; At+Exit Exit At Command Mode; At+Reset Reset Command; At+Restore Restore To Factory Setting - Ebyte E104-BT52 User Manual

Note: none

6.4.2 +++ enter AT command mode

Command
Notes：When disconnected, the module is in AT mode by default and there is no response when sending this command; you need to
use this command to enter AT mode when module is connected.

6.4.3 AT+EXIT exit AT command mode

Command
AT+EXIT
Notes: None

6.4.4 AT+RESET reset command

Command
AT+RESET
Note：take effect immediately

6.4.5 AT+RESTORE restore to factory setting

Command
AT+RESTORE
Note：
1. After resetting, it will restart automatically;
2. During the process of restoring factory settings, any form of reset is prohibited, and the power off before the operation is completed
is prohibited;

6.4.6 AT+BAUD baud rate

Inquiry AT+BAUD?
Copyright ©2012–2020，Chengdu Ebyte Electronic Technology Co.,Ltd
AT
+++
Command
+OK
Response
enter_at_mode
Response
+OK
Response
+OK
Response
OK
Response
+OK=[para]
11