Remote At Command - Ebyte E103-W02 User Manual

Serial port wifi smd small-sized pcb antenna mqtt

Hide thumbs Also See for E103-W02:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

E103-W02 User Manual

After the parameters are reconfigured, the module needs to be restarted and the configuration

parameters take effect.

3.1.6 Remote AT command

The E103-W02 in NORMAL mode can use the remote AT command to send an AT command to the

module 12476 port using the UDP communication protocol. When using the remote AT command, you

do not need to use "+++" for mode switching. Remote command is only allowed in the module NORMAL

mode, and will not be used when switching to other modes (such as MQTT, HTTP).

Table of Contents