Chapter 4: Installation
Perform the installation of HSR compressors, with its associated driver and piping,
with precision. This chapter addresses installation requirements.
Refer to the packager's standards for installation
Access and Safety
Any installation of a compressor assembly must include providing adequate space
for routine operation and maintenance activities.
Provide sufficient space and crane facilities or lifting access for efficiently
removing, reinstalling or servicing:
•
Compressor valves
•
Major compressor components
•
Major components in the gas piping system
•
Cooling water system components, if used, including drains
Consider personnel hazards, such as moving parts, high temperature and
pressure, and electrical power when determining space requirements.
Vents and Drains
DEPRESSURIZE COMPRESSOR AND ENSURE ALL GASES ARE
ISOLATE THE COMPRESSOR PACKAGE FROM ALL IGNITION
requirements.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (9)
E X P L O S I V E
PURGED BEFORE PERFORMING MAINTENANCE.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (7)
F L A M M A B L E
SOURCES.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145(f) (5)
H301/302 HSR Compressors | Rev. 2.2 | 39