GE H301 Series Operating Manual page 14

4 | Chapter 1: Getting Started
D A N G E R
SUBSTITUTION WITH NON-ORIGINAL SPARE PARTS OR PARTS
OTHER THAN THOSE RECOMMENDED BY THE MANUFACTURER
IS THE FULL RESPONSIBILITY OF THE USER AND CAUSES
IMMEDIATE DECAY OF THE GUARANTEE. THE MANUFACTURER
DISCLAIMS ALL LIABILITY FOR DAMAGE TO PERSONS AND/
OR THINGS ARISING FROM THE USE OF NON-ORIGINAL
SPARE PARTS. IN ADDITION, NON-COMPLYING WITH THE
PRECAUTIONS OR SAFETY REGULATIONS AND/OR REMOVING
OR CHANGING ANY SAFETY GUARDS, AS WELL AS THE
EXPIRATION OF THE MANUFACTURER'S WARRANTY AND THE
ADOPTION OF FULL LIABILITY ON THE PART OF THE USER, CAN
CAUSE INCIDENTS, EVEN SERIOUS HARM.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (5)
Excessive wear is not considered a material defect. Normal
wear items (such as piston rings, rod packing, valves, etc.) are
not under warranty.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (9)
On any field startup, it is important to use trained mechanics
and operators that have experience with GE compressors,
utilizing the most current technical information. Failure to
follow and implement proper commissioning instructions can
result in equipment damage.
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (9)