Hold Down Bolting; Balance Weights; Fi Gu Re 7 Maximum Out Of Balance Weight Of Opposing Throws - GE H301 Series Operating Manual

Hold Down Bolting

Frame and crosshead guide support hold down bolting ensures the compressor is firmly attached to
the skid. Larger compressor frame feet have a "through bolt" hole that can accommodate an all-thread
fastener, hardened washer & nut. All torque values are based on petroleum based thread lubricants. See
the Standard Material: Rod packing flange and valve cover bolting.
See

Balance Weights

The following weight tables, provide the part numbers and weight of the balance weights used in HSR
compressor H frame models.
H301/302
Maximum out of balance allowed
F ig u Re 7
30 | Chapter 3: General Data/Specifications
GES089 for bolt diameters and torque.
Use the suggested bolt diameter in packager's fabricated
compressor pedestal/skid. All torque values are based on
Complies with ANSI Z535, ISO 3864, OSHA 1910.145 (f) (9)
Maximum out of balance weight of opposing throws
ll torque values are based on lubricated threads.
A
Molykote ® P-37, SAE 40 weight oil.
4 ounces (0.1113 kg)