Emerson Control Techniques EN Series Installation Manual page 13

Manufacturer's Name:
Manufacturer's Address:
Products Description:
Model Number:
The products herewith comply with the requirements of the Low Voltage Directive (LVD) 73/23/EEC.
These products are considered components and as such, the EMC Directive (89/336/EEC) does not apply.
This electronic drive product is intended to be used with an appropriate motor, electrical protection components and other
equipment to form a complete end product or system. It must only be installed by a professional assembler who is familiar
with requirements for safety and electromagnetic compatibility ("EMC"). The assembler is responsible for ensuring that the
end product or system complies with all the relevant laws in the country where it is to be used. Refer to the product manual
Bradley Schwartz/ VP Engineering
European Contact:
x
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Declaration of Conformity
Declares that the following products:
Drive Accessories
RSR-2 and ALP-430
Conforms to the following product specification:
Supplementary information:
for installation guidelines.
1600 St. Pieters Leeuw, Belgium
Control Techniques
12005 Technology Drive
Eden Prairie, MN 55344
USA
August 18, 1999
Date
Sobetra Automation
Langeveldpark Lot 10
P. Dasterleusstraat 2