Table of Contents
Advertisement
EN Drive Installation Manual
Drive Faults
The Active Drive Faults dialog box is automatically displayed whenever a fault occurs. There
are two options in this dialog box: Reset Faults and Ignore Faults.
Figure 36:
Active Drive Faults Detected Dialog Box
Resetting Faults
Some drive faults are automatically reset when the fault condition is cleared. Other faults
require drive power to be cycled or the drive to be "rebooted". If you wish to continue
working in the PowerTools-FM software without resetting the fault, click the Ignore Fault
button.
To reset faults that can be reset with the Reset Faults button, simply click the Reset Faults
button in the Drive Faults Detected dialog box or push the Reset button on the front of the
drive where the fault occurred.
Viewing Active Drive Faults
To view all active drive faults, select the View Faults command from the Device menu or by
clicking on the View Faults icon on the toolbar. The dialog box displayed is the same as
Active Drive Faults Detected dialog box described above.
Rebooting the Drive
To reboot the drive, cycle power or select the Reboot Drive command from the Device menu.
This command reboots the drive attached to the active Configuration Window.
Watch Window
This feature allows you to customize a window to monitor drive parameters which you select
from a complete list of drive parameters. From this window you can watch the parameters you
selected in real time. This feature is only available when you are online with the drive.
42
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Hide quick links:
Advertisement
Table of Contents
