Buttons - ABB M1M 30 Series User Manual

M1M 30 POWER METER USER MANUAL

5.2.Buttons

Each M1M is provided with 4 pushbuttons as per below picture::
1
Functions of each button might change according to the displayed page on the meter. See below for a
complete description:
# Button Functions
1 Menu Go to the main menu; go back; or return to the default screen
Page up and enter numerical value in cyclic and ascending way and decimal point;
2 Up and when pressed continuously, page is up continuously or numerical value ascends
automatically
Page down and move to higher-order numerical value and confirm the decimal
3 Down point; and when pressed continuously, page is down or numerical value moves to
higher order continuously until zero clearing
Go to the next menu, confirm the numerical value or option input, and read the
4 Enter
average of the parameter measurements
Inside the Data reading menu (READ), a combination of pushbuttons might have a specific function, only
available on some pages. See below for a complete description:
Menu Screen
VLN
VLL
I
IN
READ/REAL/
P
Q
S
PQST
READ/LOG/ All
2
3
Combined Buttons
Enter
Up + Enter
Down + Enter
Up + Down + Enter
Up + Enter
Down + Enter
4
Function
Read the average
Read the maximum value
Read the minimum value
Reset maximum and minimum
value
Read the last set of stored data
Read the next set of stored
data
19