Installation (Instl) - ABB M1M 30 Series User Manual

M1M 30 POWER METER USER MANUAL
Brightness (BRT)
The parameter is used to adjust brightness of the display.
CONF UNIT BRT
The default of this parameter is 100%, and the adjustable range is 10%-100%.

7.2.Installation (INSTL)

INSTL includes the following sub-menus:
Menu Description
WIRI Set the type of network and number of wires on which the device is installed
CT Set the ratio of current transformers for current measurement
VT Set the ratio of voltage transformers for voltage measurement, if any
AVG Average calculation period
The first three items must be set during the first startup. For details, see "6.3.Wiring (WIRI)", "6.4.CT
ratio (CT)" and "6.5.VT ratio (VT)".
Average (AVG)
AVG needs the user to set a calculation period (in minutes).
CONF INSTL AVG
The default of this parameter is 15 minutes, and the adjustable range is 1-60 minutes.
31