Display And Buttons - ABB C13 User Manual

User Interface

4.1 Display and buttons

Display The display consists of icons, digits and letters. The measured value/menu options
are displayed with large letters. The measured unit is displayed on the bottom-
right side of the display, and the status icons are displayed at the upper part of the
display, see figure below.
Status Icons The status icons are shown in the table below.
Icon
Button The meter has one push button which is located below the display. A short press
on the button (less than 1 sec) will step through the menu/submenu. A long press
(more than 1 sec) followed by a release of the button will open the set menu or
select an item in the menu.
C13
User Manual
1 2 3
Indication
Active error
!
Metering in progress.
16
k Arh
Comment
When a error has been detected,
the icon will be lit on the display.
When no error has been detected,
the icon will be turned off.
When a load is connected to the
meter, the icon will flash to indicate
metering. When no load is con-
nected, the icon will be turned off.
2CMC486004M0201
Revision: A