L3Harris NARDA PMM ER8000 User Manual page 55

Setting COMMANDs
Syntax
ASBK
ASPA
ASRE
S3PRC
S3PRR
SAAT a
SADT b
SAFF start,stop
SAGO
SAHT h
SAOP f
SART f
SCFA n
SCFE n, name
SCFW n, freq; lev
SDMD a
SDMV v
SLDW n, freq; levq, leva
SLIE name
SLIM n
SLIW n, freq; lev
SLSN n
SMAF f
SMAN
SMANP
SMAT a
SMHT h
SRBW b
SSFD
SSFW n, freq
SSTP
STAT b
SUPP n
Function
Aborts a sweep currently in progress
Suspends a sweep currently in progress
Resumes a sweep previously paused
Sets the input for bands A, B
Sets the input for bands C, D and E
Sets Attenuator for Analyzer Mode
Sets the Detector for Analyzer Mode.
Sets both Start and Stop frequency for Analyzer mode.
Sets the ER8000 in Analyzer mode
Sets Hold Time for Analyzer mode.
Sets the Stop frequency for Analyzer mode
Sets the Start frequency for Analyzer mode
Activates the conversion factor stored in the ER8000
Saves the conversion factor (made by SCFW).
Creates a conversion factor frequency by frequency.
Switches the Demodulator On or OFF
Sets the volume of Demodulator
Sets the custom double value limit frequency by frequency
Name the custom limit and making it active or deactivating it.
Sets the Margin to be used with Smart Detector function
Sets the custom limit frequency by frequency
Sets the input for Band B
Sets the tuning frequency for manual mode
Sets the ER8000 in manual mode
Sets the ER8000 in manual mode and sets the default value
Sets Attenuator for Manual Mode.
Sets Hold Time for manual mode
Sets RBW
Sets parameters and triggers a sweep
Creates a Frequency-Scan-Tab frequency by frequency
Stops abruptly a running sweep in Analyzer mode
Sets MinAtt
Outputs on the User Port bit by bit the argument n
Remote control 7-3