L3Harris NARDA PMM ER8000 User Manual page 50

This section describes how to install the PMM 9010-RMA Rack Mount Adapter:
6.10 Installing the
PMM 9010-RMA
- Insert the cage nuts behind the vertical rails with respect to the Rack Unit
Boundary and the distance show below:
- Y ou can use a rack-insertion tool or a flat-blade screwdriver to install the
cage nuts.
- Insert the chassis into the rack.
- Slide the chassis into the rack until the front flange is flat against the cage
nuts.
- Using the four screws and black plastic washers, fix the chassis by its
flanges to the rack.
6-6 PMM 9010-RMA Rack Mount Adapter