L3Harris NARDA PMM ER8000 User Manual page 20

2.5.2 Switch ON
pushbutton with
integrated led
2.6 Environment
2-2 Installation
To switch the unit ON, press the square button and keep it pressed till the
led lights up, then release the button; the boot sequence takes place
automatically.
When the led inside the button becomes green, the instrument is ready for
use.
The led inside the button is red until the unit is ready.
The operating environment of the receiver is specified to be within the
following limits:
• Temperature
• Humidity
• Altitude
The instrument should be stored and shipped in a clean, dry environment
which is specified to be within the following limitations:
• Temperature
• Humidity
• Altitude
-5° to +45° C
< 90% relative
4000 meters
-40° to + 50° C
< 95% relative
15.000 meters