L3Harris NARDA PMM ER8000 User Manual page 12

Scan time
A band (9 kHz to 150 kHz)
200 Hz RBW
B band (150 kHz to 30 MHz)
9 kHz RBW
C band (30 MHz to 300 MHz)
120 kHz RBW
D band (300 MHz to 1 GHz)
120 kHz RBW
E band (1 GHz to 3 GHz)
1 MHz RBW
Level measuring time
(Hold time)
Measurement accuracy
S/N > 20 dB
Recommended calibration interval
Main measure functions
With free system SW PMM Emission Suite
Units
With free system SW PMM Emission Suite
(80 to 200 dB selectable display dynamic range)
Demodulation
I/O Interface
Operating temperature
Power supply
Built-in LISN
Measure frequency range
Continuous rated output current
Max permissible operating voltage
AC supply frequency range
CISPR equivalent circuit
Test socket
Line plug
Artificial hand
RF output
Dimensions
Weight
1-4 General Information
SWEEP MODE
(CISPR: preselector ON, QP detector)
< 2 s (Hold time 1 s)
< 3 s (Hold time 2 s)
< 3 s (Hold time 1 s)
< 5 s (Hold time 2 s)
< 20 s (Hold time 1 s)
< 40 s (Hold time 2 s)
< 40 s (Hold time 1 s)
< 80 s (Hold time 2 s)
< 160 s (Hold time 1 s)
< 320 s (Hold time 2 s)
CISPR 16-1-1 as default.
2 us to 120 s
9 kHz to 1 GHz ± 1.2 dB
1 to 3 GHz ± 1.6 dB
24 months
Manual, spectrum analyser and sweep modes.
Waterfall
Standard and user definable limits
Conversion and correction factors
Control of DDA (Click) analyser, LISNs and other accessories.
Auto diagnosis
Test reporting
dBm, dBµV, dBµA, dBpW, dBµV/m, dBµA/m, dBpT
AM – FM Internal loudspeaker
RS-232 DB9, USB 2.0 type B, User port DB15 (Drives PMM LISNs and accessories)
-5° to 45°C
10 - 15 Vdc, 2.5A with AC universal adapter/charger
150 kHz to 30 MHz
16A
250Vac – 350Vdc
DC to 60 Hz
50 Ω // (5 Ω + 50 uH)
SCHUKO 2P+E
IEC 60320 C20
4mm plug
Internal receiver or BNC-f
235x105x300 mm
5.2 kg
ANALYZER MODE
(preselector OFF, Peak detector, Hold time lowest)
< 50 ms (Ht 27 ms)
< 10 ms (Ht 525 us)
< 100 ms (Ht 32 us)
< 500 ms (Hold time 32 us)
< 400 ms (Hold time 4 us)