L3Harris NARDA PMM ER8000 User Manual page 10

PMM ER8000 includes the following items:
1.4 Instrument
• EMI Receiver from 10 Hz up to 30 MHz (opt.00) or 10 Hz to 3000 MHz (opt.01)
Items
• Soft carrying case
• AC/DC Converter with plug adapters;
• LISN Mains Cable
• N male to BNC female Adapter;
• BNC-BNC coaxial cable 2m length;
• RS232 cable, 2m;
• USB-RS232 serial converter;
• USB cable, 2m;
• Operating manual with return for repair form;
• PMM ER8000 Utility Software on Software Media;
• Certificate of Calibration;
• Return for Repair Form.
PMM ER8000 can be used with several optional accessories, the most common being the
1.5 Optional
following:
accessories
• PMM 9010-RMA Rack Mount Adapter for Rack 19";
• ER8000/GND Ground connection;
• 9010/CC Rigid Carrying Case;
• L2-16B: Two lines, Single phase, 16A LISN, (50Ω//5 Ω+50µH);
• L3-32: Four lines, 3-phase, 32A LISN, (50Ω//5 Ω+50µH);
• L3-64: Four lines, 3-phase, 64A LISN, (50Ω//5 Ω+50µH);
• L3-64/690: Four lines, 3-phase, 64A - 690Vac LISN, (50Ω//5 Ω+50µH);
• L3-100: Four lines, 3-phase, 100A LISN, (50Ω//5 Ω+50µH);
• L1-150M: Multi-standard Single line LISN, 150A (50Ω//1 Ω+5µH) (100 kHz to 200 MHz);
• L1-150M1: Multi-standard Single line LISN, 150A (50Ω//1 Ω+5µH) (10 kHz to 400 MHz);
• L1-500: Single line LISN, 500A (50Ω//5 Ω+50µH);
• L3-500: Four lines, 3-phase, LISN 500A (50Ω//5 Ω+50µH);
• SBRF4 RF Switching Box (Switching Box for LISNs and Loop Antennas)
• LISN Service Kit (AC-BNC adapter for LISNs verification and calibration)
• SHC-1/1000: 35 dB CISPR Voltage probe, 1500Ω;
• SHC-2/1000: 30 dB CISPR Voltage probe, 1500Ω;
• RA-01: Rod Antenna (9 kHz – 30 MHz);
• RA-01-MIL: Rod Antenna (9 kHz – 30 MHz);
• RA-01-HV: Rod Antenna (150 kHz – 30 MHz);
• BC-01: Biconical Antenna (30 – 200 MHz)
• BL-01: Biconical Log Periodic Antenna 30 MHz to 6 GHz
• LP-02: Log Periodic Antenna 200 MHz to 3 GHz
• LP-03: Log Periodic Antenna 800 MHz to 6 GHz
• LP-04: Log Periodic Antenna 200 MHz to 6 GHz
• TR-01: Antenna Tripod
• Antenna Set AS-02 (BC01+LP02+TR01)
• Antenna Set AS-04 (BC01+LP04+TR01)
• Antenna Set AS-07 (BL01+TR01)
• VDH-01: Van der Hoofden Test Head 20 kHz to 10 MHz
• RF-300 : Van Veen Loop
The PMM ER8000 can also be used with other accessories available on the market, like:
1.6 Other
• LISNs, any type;
accessories
• Antennas and Loops;
• Near Field Probes;
• Various TEM/GTEM Cells;
• Triple Loop Antenna
1-2 General Information