S&C PMH Instructions For Operation Manual page 9

COMPONENTS — Continued
S&C Uni-Rupter
Dual-purpose
front barriers
Interphase
S&C Power Fuse
and end
(Fault Fiter Electronic
barriers
Power Fuse shown)
Current sensors furnished for attach-
ment to each entrance cable when
optional overcurrent-lockout feature
(Catalog Number Suffix "-Y2") is
included
Figure 4. Switch and fuse compartments.
s
S&C ELECTRIC COMPANY
Left-hand door retainer—rotate latch
upward to open door. To secure left-hand
door closed, rotate latch downward over
stop mounted on outer edge of door
S&C Voltage
Sensor
Ground studs
Viewing window for visible verifica-
tion of switch position is removable
for phasing. To remove window,
loosen wing-head screws and lift
window off alignment bolts
S&C Mini-Rupter Switch
INSTRUCTION SHEET 663-503
Page 9 of 35
August 14, 1995