Table I-1: List Of Terminals - GE Kelman TRANSFIX 1.6 Installation Manual

Terminal Signal
1 TIP
2 RING
Note: Alarm Relay Max Ratings: 3 A at 250 V AC, 200 mA at 125 V DC or 3 A at 30 V DC.
3 NO
4 COM
5 NC
Spacer
6 NO
7 COM
8 NC
Spacer
9 NO
10 COM
11 NC
Spacer
12 NO
13 COM
14 NC
Spacer
15 NO
16 COM
17 NC
Spacer
18 NO
19 COM
20 NC
Spacer
21 NO
22 COM
23 NC
Spacer
24 NO
25 COM
26 NC
Spacer
Note: Digital inputs have a maximum voltage level of 12 V. The switching voltage input level is
approximately 2.5 V. The three digital channels are separate from each other. Digital inputs are not
available through PERCEPTION software, but can be read through the Modbus protocol.
27 DIG IN 1+
28 DIG IN 1-
29 DIG IN 2+
30 DIG IN 2-
31 DIG IN 3+
32 DIG IN 3-
Spacer
33 ANALOG IN A
34 ANALOG IN B
Spacer
MA-001 – TRANSFIX-family Installation Manual – Rev 3.0
Table I—1: List of terminals
Description
PSTN Interface
PSTN interface
Digital outputs
Service Alarm
Watchdog Alarm
Note: The default condition is NO when the product is powered on.
Relay 2
Relay 3
Relay 4
Relay 5
Relay 6
Relay 7
Digital Inputs
Digital Input channel 1, positive
Digital Input channel 1, negative
Digital Input channel 2, positive
Digital Input channel 2, negative
Digital Input channel 3, positive
Digital Input channel 3, negative
Analog Inputs
Analog input - Load sensor, positive
Analog input - Load sensor, negative
18-Jan-16 Page 52 of 55