Safety; Symbols; Warnings - GE Kelman TRANSFIX 1.6 Installation Manual

2 SAFETY

2.1 Symbols

General Warning or Caution. Refer to the Installation Manual / User
Guide to prevent injury or damage to equipment.
Electrical Hazard. Risk of electric shock.
Primary Protective Earth connection.
Hot surfaces may be present.

2.2 Warnings

The minimum ambient temperature for installation and service activities is
−10 °C.
If the equipment is installed or used in a manner not specified by the
manufacturer, the protection provided by the equipment may be impaired.
If working at height, third parties must have received appropriate training for
working at height prior to work commencing. This includes, but is not limited to
"Working at height training".
If working at a height greater than 4 feet or at a height greater than that
stipulated by national or site regulatory requirements, it is the responsibility of
the installer to ensure that planned work complies with those requirements.
The installer shall also ensure that any third-party equipment, such as an
approved platform, scaffold or lift is suitable and safe before commencing
work. Ladders or improvised platforms do not meet GE service engineer
requirements.
Once installed, the product may have more than one source of supply.
Disconnect all supplies at their source before accessing the cabinet for
servicing. Follow the site lockout-tagout (LOTO) procedure.
MA-001 – TRANSFIX-family Installation Manual – Rev 3.0 18-Jan-16 Page 7 of 55