Manufacturer's Warranty; Warranty Acceptance; Warranty Period; Conditions Of Warranty - Haulotte H14TX Maintenance Book

H14TX - HB40 - H16TPX - HB44J
A
- Safety precautions

2 - Manufacturer's warranty

2.1 -

WARRANTY ACCEPTANCE

On reception of his machine, the owner or rental company must check the machine's condition
and fill out the machine reception slip provided.
2.2 -

WARRANTY PERIOD

The present warranty is valid for a period of 12 months or up to a maximum of 1000 operating
hours for lifting and handling equipment and 2000 operating hours for public works machinery,
starting from delivery and terminating when the first limit is reached.
Spare parts are covered by a 6 month warranty.
2.3 -

CONDITIONS OF WARRANTY

HAULOTTE® guarantees its products against defects, faults or manufacturing defects when
the owner or rental company has informed HAULOTTE® of the defect.
The warranty does not cover the consequences of normal wear, nor any defects, failure or
damage resulting from poor maintenance or abnormal usage, in particular overloading, impact
by an external source, faulty installation or any modification made to products marketed
by HAULOTTE® and performed by the owner or rental company.
In the event of operation or use which does not comply with the instructions or
recommendations in the maintenance book, warranty claims will not be accepted.
The machine utilisation period must be recorded by reading the engine hour meter whenever
an intervention is made. The engine hour meter must be maintained in good working order to
guarantee maximum working life and to justify maintenance at the recommended time.
Warranty obligations for the time period stated above will cease immediately in situations
where the defect is due to the following reasons :
• Use of spare parts that are not HAULOTTE® originals.
• If elements or products other than those recommended by the manufacturer are used.
• If the HAULOTTE® name, serial numbers or identification marks are removed or altered.
• After an unreasonably long delay before reporting a manufacturing problem.
• If the owner or rental company continues to use the machine despite problems.
• If damage is caused by modifications that do not comply with HAULOTTE® specifications.
• If lubricants, hydraulic oils or fuels that do not comply with HAULOTTE® recommendations are used.
• If the machine is incorrectly repaired or used by the customer.
If no particular agreement has been made, any claims made after the previously established
warranty period has expired will be refused.
12 4000364740 E12.14 US/GB