Yamaha RX-V2600 Owner's Manual page 90

SYSTEM OPTIONS
5
When finished adjusting parameters, press
ENTER on the remote control.
■ Dimmer (Dimmer)
Use to adjust the brightness of the front panel display.
Manual Setup > Option > Dimmer >
Control range: –4 to 0
Dimmer
Multi Zone
Sur.Initialize
■ Multi Zone (Multi zone)
Use this feature to customize the Zone 2 and Zone 3
settings.
Manual Setup > Option > Multi Zone >
Choices: Speaker B, Zone2 Amplifier, Zone3 Amplifier,
Zone2 Volume, Zone3 Volume, Zone2 OSD
Dimmer
Multi Zone
Sur.Initialize
Audio Select
88
PRESET
ENTER
A/B/C/D/E
0
Speaker B
Zone2 Amplifier
Zone3 Amplifier
Zone2 Volume
Speaker B (Speaker B)
Use this feature to select the location of the front speakers
connected to the SPEAKERS B terminals.
Choices: Main, Zone B
Speaker B
Zone2 Amplifier
Zone3 Amplifier
• Select "Main" to turn on/off SPEAKERS A and B
when the speakers connected to the SPEAKERS B
terminals are set in the main room.
• Select "Zone B" if the speakers connected to the
SPEAKERS B terminals are set in another room. If
SPEAKERS A is turned off and SPEAKERS B is
turned on, all the speakers including the subwoofer in
the main room are muted and the unit outputs sound
from SPEAKERS B only.
Notes
• If you select "Zone B" and connect headphones to the PHONES
jack on this unit, the sound is output from both the headphones
and SPEAKERS B.
• When a DSP program is selected, the unit automatically enters
the Virtual CINEMA DSP mode.
Main
Zone B