Confirming The Results - Yamaha RX-V2600 Owner's Manual

9
Press n to select Start and then press
ENTER.
Loud test tones are output from each speaker and
"Measuring" appears during the AUTO SETUP
procedure.
Setup Menu
Setup Type
Start
y
• To stop the AUTO SETUP procedure, press one of the
k
/ n / l / h) or ENTER. In the pause
cursor buttons (
mode, press k to retry the procedure,
SETUP.
• If an error message appears during testing, refer to
TROUBLESHOOTING on page 119, and after carrying
out the remedy, retry the AUTO SETUP procedure.
Press ENTER
l
to cancel AUTO

Confirming the results

You can confirm the results of each analysis.
If you set Setup Type to "Auto"
The results are displayed after all items have been
analyzed.
Setup Menu
Setup Type
Start
• Press n and select Setup to set the measured values.
• Press k and select Retry to retry the AUTO SETUP
procedure.
• Press h and select Detail to view information about
measurement results and warning messages. For more
details about warning messages, see
TROUBLESHOOTING on page 119.
• Press l and select Exit to exit from the AUTO SETUP
procedure. If you select Exit, "Don't Setup?" appears on
the screen. To set the measured values and exit, select Yes.
To cancel the settings and exit, select No.
If you set Setup Type to "Step"
The results are displayed individually after each analysis.
Distance
Size
Equalizing
Level
Result
• Press n and select Next to start measurement of the next
menu item.
• Press k and select Retry to retry the AUTO SETUP
procedure.
• Press h and select Detail to view information about
measurement results and warning messages. For more
details about warning messages, see
TROUBLESHOOTING on page 119.
• Press l and select Exit to exit from the AUTO SETUP
procedure. If you select Exit, "Don't Setup?" appears on
the screen. To set the measured values and exit, select Yes.
To cancel the settings and exit, select No.
AUTO SETUP
Retry
Exit Detail
Setup
Measurement Over
Successfully
Retry
Exit Detail
Next
35