Using Macro - Yamaha RX-V2600 Owner's Manual

Using MACRO

The MACRO feature makes it possible to perform a series of operations with the press of a single button. For example,
when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button
to start playback. The MACRO feature lets you perform all of these operations simply by pressing the CD macro button.
The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros
(see page 104).
Press a macro button
CD
Macro buttons
STANDBY
POWER
A
B
PHONO
TUNER
CD
MULTI CH IN
V - AUX
CBL/SAT
MD/TAPE
CD-R
DTV
VCR 1
DVR/VCR2
DVD
*1
You can turn on some components (including YAMAHA components) connected to this unit by connecting them to the AC
OUTLETS on the rear panel of this unit. (Power control may not be synchronized with this unit depending on the component.
For details, refer to the operating instructions for the connected component.)
*2
When the remote control code for your TV is set up for either DTV or PHONO (see page 98), you can turn on the power of your TV
without selecting an input source. The remote control code set up for DTV takes priority over the one for PHONO.
*3
When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4
Playback can be started for any YAMAHA remote control-compatible MD recorder, CD player, CD recorder, DVD player, or DVD
recorder. When using macros to operate other components, you will need to program the play button on the control area of that
component (see page 100) or set a remote control code (see page 98).
To automatically transmit these signals in order
POWER
First Second
STANDBY
(*1)
POWER
—
—
POWER
(*1)
REMOTE CONTROL FEATURES
CD
(CD area)
Third
—
—
(*2)
POWER
—
TV
—
—
— —
PHONO
—
(*3)
TUNER
—
CD
(CD area) (*4)
MULTI CH IN
—
V - AUX
—
CBL/SAT
—
MD/TAPE
(MD/TAPE area) (*4)
CD-R
(CD-R area) (*4)
DTV
—
VCR 1
(VCR 1 area) (*4)
DVR/VCR2
(DVR/VCR 2 area) (*4)
DVD
(DVD area) (*4)
103