Yamaha RX-V2600 Owner's Manual page 59

2
Press k / n repeatedly to select
Stereo/Surround and then press h.
The following display appears.
PRESET
ENTER
A/B/C/D/E
STEREO
MUSIC
ENTERTAINMENT
MOVIE THEATER
3
Press k / n repeatedly to select the sound
field program you want to adjust and then
press h.
The following display appears.
PRESET
ENTER
A/B/C/D/E
Munich
Vienna
Freiburg
4
Press k / n repeatedly to select the sound
field parameter you want to adjust and then
press h.
See"SOUND FIELD PARAMETER
DESCRIPTIONS" on page 61 for detailed
descriptions of each sound field parameter.
PRESET
ENTER
A/B/C/D/E
PRESET
ENTER
A/B/C/D/E
Munich
Vienna
Freiburg
PRESET
ENTER
A/B/C/D/E
DSP Level
Init. Delay
Room Size
PRESET
ENTER
A/B/C/D/E
EDITING SOUND FIELD PARAMETERS
5
Press EXIT on the remote control to exit.
EXIT
MENU
Note
You cannot change parameter values when Memory Guard is set
to On. If you want to change the parameter values, set Memory
Guard to Off (see page 91).
Memory back-up
The memory back-up circuit prevents the stored data
from being lost. However, the stored data will be lost
in case the power cord is disconnected from the AC
wall outlet for more than one week.
■ Initializing sound field programs
To initialize each sound field program
individually
1
Repeat steps 1 to 3 to select the sound field
program you want to reset and then press h.
2
Press k / n repeatedly to select Initialize.
3
Press EXIT on the remote control to exit.
EXIT
MENU
To initialize all sound field programs
Use the Sur.Initialize parameter in the Option menu
(see page 91).
57