Yamaha RX-V2600 Owner's Manual page 36

AUTO SETUP
5
Press k / n repeatedly to select Wiring,
Distance, Size, Equalizing or Level and then
press h.
Wiring
Distance
Size
Wiring
Distance
Size
Equalizing
Wiring
Distance
Size
Equalizing
Level
Distance
Size
Equalizing
Level
Size
Equalizing
Level
6
For Wiring, Distance, Size or Level, select:
Check To automatically check and adjust the selected
item.
Skip To skip the selected item and perform no
adjustments.
y
When using THX speakers, select "Skip" for Size and make
sure that "Small" or "Small x2" is selected in Speaker Set
(see page 83) and that "80Hz" is selected in Bass Cross
Over (see page 85).
34
Skip
Check
Skip
Check
Skip
Check
Skip
Check: Natural
Check: Flat
Check: Front
Skip
Check
For Equalizing, press k / n to select:
Skip To skip the selected item and perform no
adjustments.
Check: Natural To average out the frequency response of all
speakers with higher frequencies being less
emphasized. Recommended if the "Flat"
setting sounds a little harsh.
Check: Flat To average the frequency response of all
speakers. Recommended if all of your
speakers are of similar quality.
Check: Front To adjust the frequency response of each
speaker in accordance with the sound of
your front speakers. Recommended if your
front speakers are of much higher quality
than your other speakers.
7
Once you have selected the desired setting,
press l to move back to Setup Menu.
Information
Setup Menu
Setup Type
Start
8
Press n to select Setup Type and then select:
Auto To automatically perform the entire
AUTO SETUP procedure.
Step To pause for confirmation between
each check in the AUTO SETUP
procedure.
Information
Setup Menu
Setup Type
Start
Wiring
Distance
Size
Auto
Step