Planar LookThru LO552 Series User Manual page 22

Command
Setting
Code
System State SYSTEM.STATE 2310
Test Email NETWORK.SMTP. 1229
TEST
Test Pattern PATTERN 1307
Time TIME 1100
Time - Day TIME.DAY 1101
Planar LookThru Display Series RS232 User Manual
020-1381-00B
Modifiers
? 0 = STANDBY
1 =
POWERING.
ON
2 = ON
3 =
POWERING.
DOWN
4 =
BACKLIGHT.
OFF
5 = FAULT
! Event
0 = POWER.
STATE.
CHANGED
1 = ERROR.
OCCURRED
2 = SOURCE.
DETECTED
3 = SOURCE.
LOST
4 = SOURCE.
SELECTED
! Pattern
0 = NONE
1 = BLACK
2 = WHITE
3 = GRAY
4 = RED
5 = GREEN
6 = BLUE
7 = CYAN
8 = MAGENTA
9 = YELLOW
11 = GRAYBAR
12 = REDBAR
13 = GREENBAR
14 = BLUEBAR
16 = CHECKER-
BOARD
18 = COLORBAR
=? 0 = YEAR Unsigned int
1 = MONTH
2 = DATE
3 = HOUR
4 = MINUTE
[None = ALL]
? 0 = MON
1 = TUE
2 = WED
3 = THU
4 = FRI
5 = SAT
6 = SUN
Example
No SYSTEM.STATE?
SYSTEM.STATE:STANDBY
Yes NETWORK.SMTP.TEST(SOURCE.LOST)
NETWORK.SMTP.TEST(SOURCE.LOST)
@ACK
No PATTERN(GRAYBAR)
PATTERN(GRAYBAR)@ACK
Yes [Set the month to March]
TIME(MONTH)=3 TIME(MONTH):3
Yes TIME.DAY?
TIME.DAY:TUE
RS232 Codes
Notes
Indicates the current state of
the system:
- STANDBY: The system is in
its lowest power mode. Not all
functions are available.
- POWERING.ON: The
system is
transitioning from the
STANDBY state to the ON
state.
- ON: The system is on with
the backlight on.
- POWERING.DOWN: The
system is transitioning from
the ON state to the STANDBY
state.
- FAULT: A system failure has
occurred. Use the Error Log
command to get more
information.
See Remote Monitoring
Software -> Notifications ->
Test Email
See Main -> Advanced
Settings -> Test Pattern
See Main -> Advanced
Settings -> Schedule -> Set
Date and Time
See Main -> Advanced
Settings -> Schedule -> Set
Date and Time -> Day
Page | 22