Planar LookThru LO552 Series User Manual page 10

Command
Setting
Code
Blank Screen BLANK.COLOR 1306
Color
Brightness BRIGHTNESS 200
Color COLOR 202
Color Gamut COLOR.GAMUT 214
Planar LookThru Display Series RS232 User Manual
020-1381-00B
Modifiers
=?+- 0 = RED
1 = GREEN
2 = BLUE
3 = CYAN
4 =
MAGENTA
5 = YELLOW
6 = WHITE
7 = BLACK
=?+- Zone 0-100
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
253 = ALL.INPUT
254 = ALL
254 = ALL.ZONE
255 = CURRENT
[None =
CURRENT]
=?+- Zone 0-100
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
253 = ALL.INPUT
254 = ALL
254 = ALL.ZONE
255 = CURRENT
[None =
CURRENT]
=?+- Mod 1: Zone 0 = REC709
0 = ZONE.1 1 = SMPTE.C
1 = ZONE.2 2 = EBU
2 = ZONE.3 5 = USER
3 = ZONE.4 6 = AUTO
255 = CURRENT 7 = DISABLE
[None =
CURRENT]
Mod 2: Type
0 = SETTING
1 = ACTUAL
2 = COPY
3 = REVERT
[None =
SETTING]
Mod 3: Gamut
0 = REC709
1 = SMPTE.C
2 = EBU
5 = USER
6 = AUTO
255 = CURRENT
Example
No BLANK.COLOR=BLUE
BLANK.COLOR:BLUE
No [For Zone 1] BRIGHTNESS(ZONE.1)=50
BRIGHTNESS(ZONE.1):50
[For the current zone] BRIGHTNESS=55
BRIGHTNESS:55
No [For Zone 1] COLOR(ZONE.1)=50
COLOR(ZONE.1):50
[For the current zone] COLOR=55
COLOR:55
No [Setting Color Gamut for Zone 1]
COLOR.GAMUT(ZONE.1,
SETTING)=REC709
COLOR.GAMUT(ZONE.1
SETTING):REC709
[Setting Color Gamut for the current zone]
COLOR.GAMUT(CURRENT,
SETTING)=AUTO
COLOR.GAMUT(CURRENT
SETTING):AUTO
[Reading the actual Color Gamut for the
current zone] COLOR.GAMUT(CURRENT,
ACTUAL)?
COLORSPACE(CURRENT ACTUAL):RGB
[Copy the Zone 2 REC709 gamut to all
zones]
COLOR.GAMUT(ZONE.2, COPY,
REC709)
COLOR.GAMUT(ZONE.2 COPY
REC709)@ACK
RS232 Codes
Notes
See Main -> Advanced
Settings -> Menus and
Messages -> Blank Screen
Color
See Main -> Image Adjust ->
Brightness
See Main -> Image Adjust ->
Color
"Setting" is the value that the
color gamut is set to. This
takes two modifiers and does
not support the execute
action. See Main -> Advanced
Settings -> Advanced Color ->
Color Gamut.
"Actual" is the currently
applied color gamut (cannot
return AUTO). This is read
only, takes two modifiers and
does not support the execute
action. See Main ->
Information -> Image
Information -> Color Gamut.
"Copy" is an execute action
that takes all three modifiers
and no operands. See Main -
> Advanced Settings ->
Advanced Color -> Copy to All
Zones.
"Revert" is an execute action
that takes all three modifiers
and no operands. See Main -
> Advanced Settings ->
Advanced Color -> Revert to
Defaults.
Page | 10