Planar LookThru LO552 Series User Manual page 17

Command
Setting
Code
Notification NOTIFICATION. 1222
Event EMAIL
NTP Server NETWORK.NTPSE 1214
R VER
Offset OFFSET 210
OSD Close OSD.CLOSE 1310
OSD ORIENTATION 1302
Rotation
OSD Status OSD.STATUS 1308
OSD Timeout OSD.TIMEOUT 1304
OSD OSD. 1303
Transpar- TRANSPARENCY
ency
Planar LookThru Display Series RS232 User Manual
020-1381-00B
Modifiers
=? Event Op 1: Enable
0 = POWER. 0 = DISABLE
STATE. 1 = ENABLE
CHANGED
1 = ERROR. Op 2:
OCCURRED Recipients
2 = SOURCE. List String
DETECTED
3 = SOURCE. Op 3: User
LOST Message
4 = SOURCE. String
SELECTED
=? String
=?+- Mod 1: Zone For RED,
0 = ZONE.1 GREEN and
1 = ZONE.2 BLUE
2 = ZONE.3 modifiers, one
3 = ZONE.4 operand:
253 = ALL.INPUT 0-100
254 = ALL
254 = ALL.ZONE For ALL
255 = CURRENT operand, three
[None = operands:
CURRENT] Red Offset: 0-
100
Mod 2: Color Green Offset:
0 = RED 0-100
1 = GREEN Blue Offset:
2 = BLUE 0-100
255 = ALL
[None = ALL]
!
=?+- 0 =
LANDSCAPE
1 =
PORTRAIT
? 0 = DISABLE
1 = ENABLE
=?+- 0 = OFF
10 =10.
SECONDS
30 =30.
SECONDS
60 =60.
SECONDS
120 =120.
SECONDS
240 =240.
SECONDS
=?+- 0-5
Example
Yes NOTIFICATION.EMAIL(SOURCE.DETEC
TED)= ENABLE, "test@planar.com",
"Your custom message here"
NOTIFICATION.EMAIL(SOURCE.DETEC
TED):EN ABLE "test@planar.com" "Your
custom
message here"
Yes NETWORK.NTPSERVER="pool.ntp.org"
NETWORK.NTPSERVER:"pool.ntp.org"
No [For red offset on Zone 1]
OFFSET(ZONE.1, RED)=50
OFFSET(ZONE.1 RED):50
[For all three offsets on the current zone:
Red Gain = 51, Green Gain = 52, Blue
Gain =
53]
OFFSET=51 52 53
OFFSET=51 52 53
No OSD.CLOSE
OSD.CLOSE@ACK
No ORIENTATION=LANDSCAPE
ORIENTATION:LANDSCAPE
No OSD.STATUS?
OSD.STATUS=ENABLE
No OSD.TIMEOUT=60.SECONDS
OSD.TIMEOUT:60.SECONDS
No OSD.TRANSPARENCY=3
OSD.TRANSPARENCY:3
RS232 Codes
Notes
See Remote Monitoring
Software -> Notifications ->
Notification Events
Selects the NTP server to be
used with the Use Network
Time setting.
Default = "0.pool.ntp.org"
See Main -> Image Adjust ->
Red/Green/Blue Offset.
ALL modifier adjusts all three
offsets at the same time.
The first modifier can only be
missing if both modifiers are
missing.
Forces any menus or
message boxes that are
currently on screen to close
See Main -> Advanced
Settings -> Menus and
Messages -> OSD Rotation
Indicates whether the OSD
(menu, message box or
confirmation dialog) is
currently being shown on the
display
See Main -> Advanced
Settings -> Menus and
Messages -> OSD Timeout.
Numeric value is in seconds
and can be used to program
any delay value.
See Main -> Advanced
Settings -> Menus and
Messages -> OSD
Transparency
Page | 17