Planar LookThru LO552 Series User Manual page 19

Command
Setting
Code
Preset List PRESET.LIST 2008
Preset Max PRESET.MAX 2007
Preset Name PRESET.NAME 2003
Preset Recall PRESET.RECALL 2001
Preset Save PRESET.SAVE 2002
Reboot SYSTEM.REBOOT 2402
Revert Image REVERT.IMAGE. 215
Settings SETTINGS
Save and CLONE.SETTINGS 2315
Restore
Settings
Save SAVE. 2314
Diagnostics DIAGNOSTICS
Planar LookThru Display Series RS232 User Manual
020-1381-00B
Modifiers
? 0 = FIRST A list of
2147483647 unsigned
= NEXT integers
? Unsigned
Integer
=? Preset Number String
1-1000
! Preset Number
1-1000
! Preset Number
1-1000
!
! Zone
0 = ZONE.1
1 = ZONE.2
2 = ZONE.3
3 = ZONE.4
255 = CURRENT
[None =
CURRENT]
! Mod 1: Operation
0 = COPY
1 = PASTE
Mod 2: Location
0 = USB
! Location
0 = USB
Example
Yes PRESET.LIST(FIRST)?
PRESET.LIST(FIRST):1 2 3 5 7 34
Yes PRESET.MAX?
PRESET.MAX:34
Yes [Set Preset 4 name to "Hello"]
PRESET.NAME(4)="Hello"
PRESET.NAME(4):"Hello"
No [Save to Preset 4] PRESET.RECALL(4)
PRESET.RECALL(4)@ACK
No [Save to Preset 4] PRESET.SAVE(4)
PRESET.SAVE(4)@ACK
No SYSTEM.REBOOT
SYSTEM.REBOOT@ACK
No [For Zone 1]
REVERT.IMAGE.SETTINGS(ZONE.1)
REVERT.IMAGE.SETTINGS(ZONE.1)
@ACK
[For the current zone]
REVERT.IMAGE.SETTINGS
REVERT.IMAGE.SETTINGS@ACK
No CLONE.SETTINGS(COPY, USB)
CLONE.SETTINGS(COPY, USB)@ACK
No SAVE.DIAGNOSTICS(USB)
SAVE.DIAGNOSTICS(USB)@ACK
RS232 Codes
Notes
To get a list of all the filled
presets, start by entering the
following command:
PRESET.LIST(FIRST)
Use the following command to
read additional filled presets:
PRESET.LIST(NEXT)?
Continue sending the second
command above until the last
number shown matches the
value returned by the Preset
Max command, or until the
number of presets listed
equals the number returned
by the Preset Count
command.
Note: Unless you have more
than 64 presets saved,
sending this command one
time will return a full list of all
presets.
Displays the number of the
highest saved preset
Sets the name listed for the
preset in the Delete, Recall
and Save menus.
Default = "Preset n", where 'n'
is the preset number (e.g.
"Preset 4")
See Main -> Presets -> Recall
See Main -> Presets -> Save.
A maximum of 100 presets
may be saved. The preset
numbers used do not have to
be contiguous and may be
greater than 100.
Forces the system to restart
See Main -> Image Adjust ->
Revert to Defaults
See Main -> Advanced
Settings -> System Settings ->
Save All Settings to USB
See Main -> Advanced
Settings -> System Settings ->
Restore All Settings from USB
See Main -> Advanced
Settings -> System Settings ->
Save Diagnostics to USB
Page | 19