Applicable Plc - Mitsubishi MELSEC-FX0N Series User Manual

FX0N-32NT-DP Profibus-DP Interface Unit
1.4

Applicable PLC

For setting up a system, the 32NT-DP can be connected directly to the PLC's extension port or
to any other extension unit's right side extension port.
The 32NT-DP occupies 8 points of I/O on the PLC's expansion bus. The 8 points can be
allocated from either inputs or outputs. The maximum I/O for the FX
The maximum I/O for the FX
Table 1.2: Applicable PLC
PLC Type
FX Series
0N
FX Series
1N
FX Series
2N
FX Series
2NC
*1 When connecting to an FX
/FX
2N 2NC
Version
All version
All version
All version
*1
All version
2NC
system is 256 I/O.
Controlled maximum I/O points
128 points
128 points
256 points
256 points
series PLC, an FX -CNV-IF is required.
2NC
Introduction 1
/FX system is 128 I/O.
0N 1N
1-6