Mounting; Arrangements - Mitsubishi MELSEC-FX0N Series User Manual

FX0N-32NT-DP Profibus-DP Interface Unit
2.1

Mounting

2.1.1

Arrangements

The 32NT-DP connects on the right side of the connected FX
main unit or extension unit/block (including special function blocks). For further information of
mounting arrangements, refer to the hardware manual of the connected main unit.
*1 When connecting to an FX
2.1.2 Mounting
The mounting method of the 32NT-DP can be DIN rail mounting or direct wall mounting.
1) DIN rail mounting
a) Align the upper side of the DIN rail mounting groove of the 32NT-DP with a DIN rail*1
( ), and push it on the DIN rail( ). See Figure 2.2.
b) When removing the 32NT-DP from the DIN rail, the hook for DIN rail is pulled ( ), and
the 32NT-DP is removed ( ). See Figure 2.2.
*1 Uses DIN 46277 <35mm (1.38")>
series PLC, an FX
2NC
Wiring and Mounting 2
, FX , FX or FX
0N 1N 2N
-CNV-IF is required.
2NC
*1
series
2NC
2-2