Overview; Accessing The Web Page; Accessing The Web Page Via Configuration Utility; Figure 6.1 Accessing The Web Page Via Configuration Utility - Advantech EKI-1511L User Manual

6.1

Overview

EKI-1511L serial device server can be configured through a web interface. By using a
standard web browser, the same procedure as with the Windows configuration utility
can be used. In the browser's address field, enter the IP Address of your EKI-1511L
serial device server. The default IP setting is 10.0.0.1, but you should use the IP
which you have previously assigned for this device. Once the IP is entered, you will
be presented with the following windows.
Note! Before using the web-based configuration, make sure your host PC
Ethernet network IP domain is as same as the serial device server, or it
can establish the TCP connection with the serial device server.
Note! It is recommended that you use Microsoft Internet Explorer 7.0 or
higher.
6.2

Accessing the Web Page

6.2.1

Accessing the Web Page via Configuration Utility

To access the web page via configuration utility:
1. Select Ethernet under the desired device.
2. Click Launch Browser.

Figure 6.1 Accessing the Web Page via Configuration Utility

EKI-1511L User Manual 49