11.9
MOUNTING THE METAL SIDE PANELS
• Hook the front side panel onto the screws (see Fig. 38 page 21).
• Loosen the rear screws (see Fig. 39 page 21).
Fig. 38 - Attach the side panels
11.10
MOUNTING THE MAJOLICA SIDE PANELS (KOOK 67 4.0 - KOOK 87)
• Fasten the M4 screws to the majolica panels, letting them protrude by 2 mm (see Fig. 40 page 21).
• Place the tiles on the side of the stove (see Fig. 41 page 21).
• Fit the tile screws in the appropriate seats (see Fig. 42 page 21).
Fig. 40 - Fasten the screws to the majo-
lica panels
11.11
WOOD DRAWER FRONT ASSEMBLY (KOOK 87)
• Remove the wood drawer
• With the screws, secure the coloured front to the drawer (see Fig. 43 page 21).
• Position the handle on the front panel (see Fig. 44 page 21) and fix the screws from inside the drawer (see
Fig. 45 page 21).
Fig. 43 - Fix profile
11.12
MOUNTING THE FLUE GAS EXHAUST STUB PIPE
All stoves have the possibility to discharge the flue gas at the top or at the back.
• Mounting the upper exhaust:
KOOK 60 4.0 - KOOK 67 4.0 - KOOK 70 4.0 - KOOK 80 - KOOK 87 - KOOK 90 4.0
Fig. 41 - Position the tiles
Fig. 44 - Position handle
Fig. 39 - Fasten the side panels
Fig. 42 - Attach tiles
Fig. 45 - Fix handle
EN
21