Examples Of Correct Installation - Cadel KOOK 60 4.0 Installation, Use And Maintenance Manual

Wood cooking stove

Hide thumbs

Table Of Contents

Table of Contents

SYSTEM TYPE

Maximum number of unions

Level section (minimum inclination 3%)

Installation at a height above 1200 m a.s.l.

• Use a specific plate pipe for stoves.

• It is forbidden to use metal, fibre cement or aluminium flexible pipes.

• For change of direction it is obligatory always to use a T-union (or a curve not with right angle) with inspection

plug which enables an easy periodic cleaning of the pipes.

• Please assure you that after the cleaning the inspection plugs are sealed with its efficient gasket.

• It is forbidden to connect more appliances to the same fume conduit.

• It is forbidden to convey in the same fume conduit exhausts from overhanging cooker hoods.

• It is forbidden to exhaust flue gases directly from the wall towards the outside and closed spaces also at open

top.

• It is forbidden to connect any other appliance (wood stoves, cooker hoods, boilers, etc...).

• The fume conduit must be placed at a distance of minimum 500 mm from flammable or heat-susceptible

components.

• The fume conduit must be connected with stove exhaust in a fixed and tight manner, and if required with the

insertion of a damper (see FEATURES page 35).

It is prohibited to connect more than one wood/pellet (*) or any other type of appliance (vent cowling...) to the

same flue.

(*) unless there are national derogations (for instance in Germany), which under suitable conditions allow for

the installation of several appliances in the same fireplace. In any case, strictly follow the product/installation

requirements of the relative regulations/legislation in force in that country.

9.11