Table of Contents
Advertisement
12.6
CLEANING OF PAINTED METAL PANELS
To clean painted metal panels use a soft cloth. Do not use degreasant agents like alcool, diluents, acetone,
gasoline because these could irremediably damage the varnish.
12.7
CLEANING OF CERAMIC PANELS
Some stove models has an external lining made up of ceramic. These pieces are handmade therefore they
could inevitably present crazings, seedinesses, shadings.
To clean ceramic panels use a soft and dry cloth. If using any cleaners this will seep through the crazings putting
them in evidence.
12.8
FAN REPLACEMENT
For fan replacement proceed as follows:
• Extract the plug from the socket.
• Remove the ceramics to prevent breakage.
• Disconnect the chimney, tilt the stove and place it on the floor on the back side.
• Unscrew the 4 screws at the sides of the casing of the fan.
• Disconnect the faston and unscrew the failure fan screws.
• Replace the fan and repeat the inverse operation.
12.9
GASKET REPLACEMENT
In case of deterioration of fire door gasket and/or ash door gasket it is necessary to replace them by an autorized
technician in order to guarantee the good running of the stove.
Use exclusively original spare parts.
12.10
GLASS CLEANING
The glass-ceramic of the fire door is able to stand till 700°C but not to thermal shocks.
The probable cleaning with usual sale product for glass cleaning must be effected at cool glass in order to avoid
explosions.
12.11
HEART BREAK
Probable cast iron or refractory heart break are due to an excessive overheating caused by too much fuel or
by too much combustion air. Have the damaged elements immediately replaced in order to avoid feather
damages to the stove.
Use exclusively original spare parts.
CARINA - DORA
EN
19
Advertisement
Table of Contents
