Jolimark TP860 Series User Manual
  1. Manuals
  2. Brands
  3. Jolimark Manuals
  4. Printer
  5. TP860 Series
  6. User manual

Jolimark TP860 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
TP860 Series
Printer

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TP860 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Jolimark TP860 Series

Summary of Contents for Jolimark TP860 Series

  • Page 1 User's Manual TP860 Series Printer...
  • Page 2 Corporation names and product names are the registered trademarks or commodity names of the corporation. ＊ Jolimark is a registered trademark of Kong Yue Electronics & Information Industry (XIN HUI) LTD. ＊ EPSON and ESC/POS are registered trademarks of Seiko Epson Corporation.
  • Page 3 TP860 User's Manual Warnings, Cautions, and Notes Pay attention to the following promises when using this manual: Warning: Warnings must be followed carefully to avoid bodily injury. Caution: Cautions must be observed to avoid damage to your equipment. Note: Notes contain important information and useful tips on the operation of your printer. - ii -...

  • Page 4: Important Safety Instructions

    TP860 User's Manual Important Safety Instructions Read all of these instructions carefully and thoroughly and save them for later reference. The unauthorized operation would lead to malfunction or accident. Manufacturers have no responsibilities for the problems which are led by unauthorized operations. Follow all warnings and instructions in the manual as well as marked on the product.

  • Page 5: Table Of Contents

    2.8 Ethernet Settings..........................11 2.8.1 Connecting the Printer ........................ 11 2.8.2 Setting IP Address ........................11 2.9 Wi-Fi Setting of Jolimark Printer......................14 2.9.1 Connecting the Printer ........................ 14 2.9.2 Wi-Fi Parameters Description..................... 17 2.9.3 Wi-Fi Interface Status Display and Parameters Reset..............27 2.10 Mobile Equipment Wi-Fi Printing Function Application ..............28...
  • Page 6 TP860 User's Manual 3.5.1 Set the Printer Parameter by the Matching Driver ..............44 3.5.2 Set the Printer Parameter by the Browser Webpage ..............46 3.5.3 Menu Terms Descriptions ......................48 3.6 Receipt Recovery Function ....................... 49 3.6.1 Overview............................. 49 3.6.2 How to use Receipt Recovery Function in Windows driver............49 Chapter 4 Installing the Roll Paper ......................

  • Page 7: Chapter 1 Overview

    According to different data ports (interfaces), TP860 series can be classified into different models: TP860, TP860U, TP860US, TP860UE, TP860USE, TP860UB, TP860W and TP860UW. TP860 series printers are equipped with auto cutter, so that customer could select full cut or partial cut.

  • Page 8: Main Parts Of The Printer

    TP860 User's Manual 1.3 Main Parts of the Printer Power LED Case Error LED Cover-open button FEED key Cutter Front cover Paper out LED Figure 1-1 Main parts of the printer Power switch Power supply inlet Data interface Cash drawer interface Figure 1-2 Interfaces on the back of the printer Note: Please take the specific interface as standard.

  • Page 9: Chapter 2 Installing The Printer

    TP860 User's Manual Chapter 2 Installing the Printer 2.1 Unpacking and Checking Check the following items in the package, if any of these items is missing, please contact your dealer. Printer AC adapter Power cord Driver CD Interface cable (Optional) Roll paper guide (Optional) (Including User's Manual and Driver) Figure 2-1 Packing list...

  • Page 10: Connecting The Parallel Interface Cable

    TP860 User's Manual Cash drawer cable Cash drawer interface Figure 2-2 Connecting the cash drawer cable Caution: Please use the appropriate cash drawer. Manufacturer will not honor warranty when using unauthorized cash drawer. 2.3.2 Connecting the Parallel Interface Cable 1. Make sure the computer and the printer are both turned off, plug the parallel cable to the parallel interface of the printer, Squeeze the wire clips on both sides and make the cable fixed.

  • Page 11: Connecting The Serial Interface Cable

    TP860 User's Manual USB interface USB interface cable Figure 2-4 Connecting the USB interface cable 2.3.4 Connecting the Serial Interface Cable 1. Make sure the computer and the printer are both turned off, plug the serial cable to the serial interface of the printer.

  • Page 12: Connecting The Power Cord

    Do not plug the power cord to electrical outlet. 2. Please use the electrical outlet connecting the ground properly. 3. Please use the original Jolimark AC adapter only. Manufacturers have no responsibilities for the problems which are led by using unauthorized AC adapter.

  • Page 13: Hand-Operated Installing Way

    TP860 User's Manual 2.5.2 Hand-operated installing way Note: This installing way is used for the people who have some knowledge on hand-operated installing and equipment application. 2.5.2.1 The operating systems of Windows 2000/XP/Vista/Win7 (1) The hand-operated installing steps of parallel interface cable or serial interface cable: The following steps are used Windows XP as an example.

  • Page 14: Selecting The Cutter

    TP860 User's Manual 6. Follow the guide and click “Next” gradually till the installation is finished. 2.6 Selecting the Cutter Please install the driver following the setup description in the Driver CD. What’s more, you can use the TM-T88II, TM-T88III series driver of EPSON. If you want to cut the paper after printing each page, please select “cut”...
  • Page 15 TP860 User's Manual 3. Tick off the option of “My device is set up and ready to be found.” Click “Next” to continue. - 9 -...
  • Page 16 TP860 User's Manual 4. Select the “TP860”, and then click “Next”. TP860 5. Tick off the option of “Let me choose my own passkey” and enter “1234” as shown, then click “Next”. 6. Record the Outgoing COM port and click “Finish”, then reboot the computer. - 10 -...

  • Page 17: Ethernet Settings

    Note: Every Bluetooth device has its own address. Please reinstall it when replacing the Bluetooth device. 2.8 Ethernet Settings Please use Jolimark network setting software NetFinder to set the IP address for Jolimark Ethernet interface network printers. NetFinder Software (NetFinder.exe) can be found in the CD or downloaded from www.jolimark.com.
  • Page 18 TP860 User's Manual Button description: Exit — Exit from the software Search — Search printers in the same LAN Assign IP — Modify the IP address and other settings for the specified printer. 2. Searching the Printer Click “Search” button in the main interface, the dialogue box appearing will begin searching automatically and displays the status, listing a printer in the main interface if found.
  • Page 19 TP860 User's Manual description and the right are the IP address and MAC address. What’s more, the assign mode (dynamic/static) is noted behind the IP address. 1) Correlative description for IP address settings In order to search and set printer’s IP address conveniently for the first time, the factory default setting is DHCP mode which assigns IP address dynamically.

  • Page 20: Wi-Fi Setting Of Jolimark Printer

    Record the printer’s IP address, which will be used in the section “Newly-install printer network driver” or “Upgrade-install printer network driver (setting driver’s network port)”. 2.9 Wi-Fi Setting of Jolimark Printer 2.9.1 Connecting the Printer TP830 is taken as an example to respectively describe the connection of Windows, Android and iOS operation systems.
  • Page 21 TP860 User's Manual Double click it The printer Wi-Fi of this example. Figure 1 （2）Connecting to the equipment in Android Take the mobile phone of Android 4.4 as an example to show how to connect the printer with the equipment in Android. 1.
  • Page 22 TP860 User's Manual Figure 2 （3）Connecting to the equipment in iOS Take the mobile phone of iOS 8.1 as an example to show how to connect the printer with the equipment in iOS. 1. Turn on the printer; make sure the printer is in normal working condition. Start the operation 30 seconds after the printer is on.

  • Page 23: Wi-Fi Parameters Description

    TP860 User's Manual The printer Wi-Fi of this example. Figure 3 2.9.2 Wi-Fi Parameters Description After connecting the equipment with the printer through wireless network, please import http://10.10.10.1 in the browser address bar and enter, then the setting interface pops up. The display style of setting interface may differ in different systems, but the parameter items are the same.
  • Page 24 TP860 User's Manual Figure 4 You can select Simple Chinese, Traditional Chinese and English in the “Select Language” and the default language is English. When you need to change the language, just select the language you need in the “Select Language” and then click “Apply” (as shown in Figure 5). Figure 5 - 18 -...
  • Page 25 TP860 User's Manual (1) Printer-equipment connected printing Printer-equipment connected printing is a way of printing which uses printer as the hotspot and connects the wireless equipment for printing. “Wireless Settings” is the relevant setting parameter when the printer is as the hotspot (as shown in Figure 6).
  • Page 26 TP860 User's Manual Security Mode: The security mode of the printer wireless card. You can modify it if necessary. If the connection between printer and computer is exceptional, please restart the printer or modify “Channel’ in “AP Client”. (2) AP connected printing AP connected printing is a way of printing which connects the printer with the wireless equipment by the outer hotspot.
  • Page 27 TP860 User's Manual Double click it Figure 8 ② The dialog box “Wireless Network Connection Status” pops up, then click “Properties” (as shown in Figure 9). Figure 9 - 21 -...
  • Page 28 TP860 User's Manual ③ When the dialog box pops up, click “Wireless Networks” on the upper side of the dialog box (as shown in Figure 10). Figure 10 ④ Select the current wireless network name in “Preferred networks” and then click “Properties” ( as shown in Figure 11).
  • Page 29 TP860 User's Manual Figure 11 ⑤ When the window of “Properties” pops up, find out the security mode and encrypt type in “Wireless network key” (as shown in Figure 12). - 23 -...
  • Page 30 TP860 User's Manual Security mode Encrypt type Figure 12 ⑥ Close the windows in turn, then the dialog box “Local Area Connection 2 Status” pops up according to the operation of step , click “View Wireless Networks” (as shown in Figure 13).
  • Page 31 TP860 User's Manual Figure 13 - 25 -...
  • Page 32 TP860 User's Manual The current Wi-Fi hotspot of this example. Figure 14 The setting of Security Mode and Encrypt Type Refer to “Connecting the Printer”, connect the wireless equipment with the printer and select the parameters acquired by the above steps in the “Security Mode” and “Encrypt Type” of the “AP Client”.

  • Page 33: Wi-Fi Interface Status Display And Parameters Reset

    TP860 User's Manual Figure 15 Note: The green handshaking mark on the right side of the SSID column denotes the connection between the printer and the outer Wi-Fi hotspot is successful. IP Address: Set the IP address of the printer wireless card and the IP address should be in the same segment with the wireless networks you are using.

  • Page 34: Mobile Equipment Wi-Fi Printing Function Application

    2.10 Mobile Equipment Wi-Fi Printing Function Application The Jolimark printer which is equipped with Wi-Fi interface supports the print service of Android system 4.4 or above version and the AirPrint wireless printing function of iPhone iOS system. After the Android mobile equipment has installed the Jolimark print service plug-in, it can directly use the system print service to realize wireless printing;...
  • Page 35 TP860 User's Manual Download the print service installation package AdrPrintSvc.apk from www.jolimark.com. After running the installation program, the “JM Print Service” will be added in the Android system. 2. Connect Wi-Fi printer 2.1 Enter into the “Settings” of system, as shown in Figure 18.
  • Page 36 TP860 User's Manual 3. Turn on the print service 3.1 Enter into the “Settings” of the system, as shown in Figure 18. 3.2 Find out “Printing” in “Settings” interface and enter into, as shown in Figure 21. 3.3 Find out “JM Print Service” in “Printing” interface and enter into, as shown in Figure 22. Figure 22 Figure 21 3.4 Switch the “JM Print Service”...
  • Page 37 TP860 User's Manual Figure 24 Figure 23 4. Run APP APP has to support the system’s print service, WPS Office is taken as an example to describe. 4.1 Run the APP “WPS Office”, as shown in Figure 25. 4.2 Open the document which is to be printed in the software, then click the “Tools” button, as shown in Figure 26.
  • Page 38 TP860 User's Manual Figure 28 Figure 27 4.5 When the “Select Print Service” interface pops up, select “System Print Service”, as shown in Figure 29. 4.6 Select “TP830@10.10.10.1”, as shown in Figure 30. Figure 29 Figure 30 4.7 Make sure the printer and the corresponding printing parameters are correct, click “Print”, as shown in Figure 31.

  • Page 39: Airprint Printing Application Of Iphone Ios Equipment

    TP860 User's Manual Figure 31 Figure 32 2.10.2 AirPrint Printing Application of iPhone iOS Equipment iPhone iOS equipment used in this example is iPad Air2, iOS system version is 9.1. The application situation of other iOS equipment or system version may be different to this example. 1.
  • Page 40 TP860 User's Manual 1.4 Select the “TP830” hotspot, as shown in Figure 36. Figure 35 Figure 36 2. Run APP As the interface designs of APP are different, the operating way of printing function will also be different. “Word” is taken as an example to describe. 2.1 Install and run “Word”, as shown in Figure 37.
  • Page 41 TP860 User's Manual Figure 39 Figure 40 2.5 When the “Printer Options” interface pops up, click “Select Printer”, as shown in Figure 41. 2.6 Select “TP830” in the list, as shown in Figure 42. Figure 42 Figure 41 2.7 Return to “Printer Options” interface and click “Print”, the system sends print data to the printer, as shown in Figure 43.

  • Page 42: Installing Printer Network Driver

    TP860 User's Manual Figure 43 2.11 Installing Printer Network Driver The ways of installing network driver are classified into Newly-install way and Upgrade-install way according to whether the PC is installed the printer driver or not. If the printer driver hasn’t been installed on the PC, adopt newly-install way whose steps are shown in “Newly-install printer network driver”.
  • Page 43 TP860 User's Manual 5) A window of “Add standard TCP/IP Printer Port Wizard” pops up, click “Next”. 6) A window of “Add Port” pops up, enter the IP address reported by the “Setting printer’s IP address” in the “Printer Name or IP Address” column. Take IP address “192.168.0.240” for example as the figure shown below.
  • Page 44 TP860 User's Manual 8) A window of “Port Settings” pops up. Affirm that “Port Name” and “Printer Name or IP Address” are correct, “Protocol” is “RAW” and “Port Number” is “9100”, click “OK”. 9) Return to “Additional Port Information Required”, click “Next”. - 38 -...
  • Page 45 TP860 User's Manual 10) A window of “Completing the Add Standard TCP/IP Printer Port Wizard” pops up, click “Finish”. 11) A window of “Install Printer Software” pops up, click “Have Disk”. 12) A window of “Install From Disk” pops up. Please according to the operating system environment, such as Windows 2000/XP/Vista/Win7 operating system you should select the path as follows: CD-ROM →...
  • Page 46 TP860 User's Manual 5) A window of “Add Standard TCP/IP Printer Port Wizard” pops up, click “Next”. 6) A window of “Add port” pops up, import the IP address reported by the “Setting printer’s IP address” in the “Printer Name or IP Address” column. Take IP address “192.168.0.240” for example.
  • Page 47 TP860 User's Manual 8) A window of “Port Settings” pops up. Affirm that “Port Name” and “Printer Name or IP Address” are correct, “Protocol” is “RAW” and “Port Number” is “9100”, click “OK”. - 41 -...
  • Page 48 TP860 User's Manual 9) Return to “Additional Port Information Required”, click “Next”. 10) A window of “Completing the Add Standard TCP/IP Printer Port Wizard” pops up, click “Finish”. 11) Return to “Printer Ports”, click “Close”. 12) Return to “Properties”, make sure the network port is selected, click “Apply”, and then click “Close”. Thus, printer’s network port setting is finished.

  • Page 49: Chapter 3 Operation Instruction

    TP860 User's Manual Chapter 3 Operation Instruction 3.1 Control Panel There are three LEDs and one key on the control panel. (As shown in Figure 3-1) Figure 3-1 Control panel 3.1.1 LED Description Denotes whether the printer’s power supply is connected or not. The LED is POWER (Green) on when the power is connected.

  • Page 50: Online-Aptitude Parameter Settings

    TP860 User's Manual printer can be turned off. 3.5 Online-aptitude Parameter Settings 3.5.1 Set the Printer Parameter by the Matching Driver TP860 supports the function of parameter settings, which can be set in the PC with the driver installed The concrete setting steps are shown as follows: 1.
  • Page 51 TP860 User's Manual 6. The left side of each items is the parameter icon, the top right is the item name and the bottom right is the current setting. The current settings of the printer will be loaded automatically when opening each parameters settings window.

  • Page 52: Set The Printer Parameter By The Browser Webpage

    TP860 User's Manual 7. When setting the parameter, please click the parameter icon firstly to open the parameter setting window. In the parameter setting window, there are parameter options, item explanation and control buttons. After selecting the corresponding parameter, click “Set”, the printer will change the setting at the moment it receives the change command.
  • Page 53 TP860 User's Manual 3. Click the different option of the left -side column to enter into the corresponding webpage, the webpage will show the relevant information and state of the printer, if the printer state has changed, please refresh the webpage to get the latest printer information. - 47 -...

  • Page 54: Menu Terms Descriptions

    TP860 User's Manual 4. When setting the parameter, after setting the parameter in the corresponding webpage, click “submit” button, after the webpage reloading, the new settings take effect. Note: In the “System Information” interface, if you change the setting of DHCP and click the “submit”, please restart the printer after 5 seconds so that the printer can update the information! 3.5.3 Menu Terms Descriptions...

  • Page 55: Receipt Recovery Function

    3.6 Receipt Recovery Function 3.6.1 Overview Receipt Recovery technology is the special function of Jolimark printers, it can solve the problem of data missing and make sure that all the data can be received and printed by printer. When something abnormal happens, printer can achieve the completeness of the receipt by printing again or continuous printing.
  • Page 56 TP860 User's Manual 2. Select the corresponding driver, Right click and then select “Properties”. 3. Click “preferences” in the “Properties” page - 50 -...
  • Page 57 TP860 User's Manual 4. If the Ethernet or Wi-Fi is used, user needs to add “JM Printer Port Monitor” new port in the driver. If use other ports, please skip this step. （1）Enter into the “Port” in the “Properties” page and click “Add Port”. - 51 -...
  • Page 58 TP860 User's Manual （2）Enter into the window of “Printer ports” and select the “JM Printer Port Monitor”, click “New port”. （3）Enter into the window of “Add Network Port” and fill in the corresponding network address, click “OK”. - 52 -...
  • Page 59 TP860 User's Manual （4）Close the window of “Printer ports” and return to “Properties” page, select JMNET and click “Apply”. 5. Click “Advanced” in the “Preferences” page. - 53 -...
  • Page 60 TP860 User's Manual 6. Select “Security Reliability Settings” in the Advanced Options interface, if select “Use Protocol Restart Unrecoverable Error Task”, it means the function has been turned on. Otherwise, this function is turned off. - 54 -...

  • Page 61: Chapter 4 Installing The Roll Paper

    TP860 User's Manual Chapter 4 Installing the Roll Paper The printer can use the paper with the width of 79.5±0.5mm, 69.5±0.5mm and 57.5±0.5mm and it is easy to load paper. How to deal with the paper will be introduced in details in this chapter. 4.1 Thermal Paper Installing Steps Caution: 1.
  • Page 62 TP860 User's Manual Roll paper Error Correct Figure 4-3 The direction of loading paper Note: Paper head should be placed down and pulled towards the paper-input slot, but not the opposite. 3. Pull out a small amount of paper and put it as the figure shown, then close the front cover. Roll paper Figure 4-4 Pull out the paper head and close the front cover Note: After finishing installing the paper, if PAPER OUT LED and ERROR LED are still on, or...

  • Page 63: Chapter 5 Specification

    TP860 User's Manual Chapter 5 Specification 5.1 General Specification Item Description Printing method Thermal line printing Paper feed mode Unidirectional with friction feed Eject from front Paper eject direction Dot density 640 dots/line (203×203DPI) Printing width Max:80 mm, 640 dots Print speed Max: 300 mm/s Paper feed speed...
  • Page 64 TP860 User's Manual Character printing command: Support ANK characters, user-defined characters and enlarged printing of Chinese characters 1~8 times (1-6 times enlarged printing in STAR Line Mode), can adjust character line spacing Dot image printing command: Support different densities dot images and downloading image printing, can save NV bitmap without electricity (Can save LOGO for long) Linear bar code: UPC-A, UPC-E, EAN-13, EAN-8, CODE39,...

  • Page 65: Interface Specification

    TP860 User's Manual 5.2 Interface Specification The printer is configured with one cash drawer interface and one data interface (you can select Parallel interface, USB interface, USB interface + Serial interface, USB interface + Ethernet interface, USB interface + Serial interface+ Ethernet interface, USB interface + Bluetooth, Wi-Fi interface or USB+Wi-Fi interface + Wi-Fi).

  • Page 66: Usb Interface

    TP860 User's Manual DATA7 DATA8 Acknowledge pulse, Low level means that printer is /ACK ready to receive data. BUSY High level means printer is too busy to receive data. High level means that paper is out. “High” level is pulled up by resistor. /ERR Low level means the printer is in error state.
  • Page 67 TP860 User's Manual Figure 5-5 Pin number of serial interface connector Table A-3: Signal definition of the serial interface pin Signal From Description number Host Receive data from Host Printer Send control code X-ON/X-OFF and data to the Host “MARK” state means printer is too busy to receive data; Printer “SPACE”...

  • Page 68: Ethernet Interface

    TP860 User's Manual Printer 9PIN connector Host 25PIN connector Figure 5-7 The connection figure of host 25PIN and printer 5.2.5 Ethernet Interface Ethernet interface of 10/100Base-T can be connected to 10/100M Ethernet. Figure 5-8 Ethernet interface 5.2.6 Power Supply Inlet TP860 printer connects with a 24V±10%, 2.5A AC adapter.

  • Page 69: Chapter 6 Maintenance

    TP860 User's Manual Chapter 6 Maintenance 6.1 Cleaning the Printer Cleaning periodically and the cleaning tool Periodical cleaning: every 3 months or every 300 working hours once Cleaning tool: dry cloth (please use soft cloth to clean metal parts) Cleaning the printer parts Clean the oily parts of the printer with dry cloth.

  • Page 70: Chapter 7 Control Commands

    TP860 User's Manual Chapter 7 Control Commands 7.1 General TP860 supplies ESC/POS printing commands and is compatible with STAR Line Mode printing commands. The format is described as follows: Command Function Format: ASCII: Shown in standard ASCII character serial Decimal: Shown in Decimal number serial Hex: Shown in Hex number serial Description: The function and using instruction of that command Example: Some examples will be listed for easier understanding...
  • Page 71 TP860 User's Manual off-line status. n=1: Transmit printer status n=2: Transmit printer off-line status n=3: Transmit printer error status n=4: Transmit paper sensor status ESC BEL n1 n2 Beep for appointment Format: ASCII: Decimal: Hex: Description: n1 specifies the length of beeping time, n2 specifies the length of intermission time and n3 is the beeping times.
  • Page 72 TP860 User's Manual minimal unit). nL, nH=0~255. Horizontal or vertical minimal unit is specified by GS P command. ESC % Select/cancel user-defined characters set Format: ASCII: Decimal: Hex: Description: n=1, Select the user-defined characters set; n=0, Select inner characters set Default: n=0 ESC &...
  • Page 73 TP860 User's Manual ESC - Turn underline mode on/off Format: ASCII: Decimal: Hex: Description: n=0, 48 Turn underline mode off. n=1, 49 single underline mode on n=2, 50 double underline mode on ESC 2 Set the line spacing to 3.75mm Format: ASCII: Decimal:...
  • Page 74 TP860 User's Manual ESC D Set horizontal tab position Format: ASCII: n1……nk NUL Decimal: n1……nk NUL Hex: n1……nk NUL Description: Set the horizontal tab position to n columns from the beginning of the line. n=0~255; k=0~32; ESC E Turn emphasized mode on/off Format: ASCII: Decimal:...
  • Page 75 TP860 User's Manual ESC \ Set relative print position Format: ASCII: Decimal: Hex: Description: Set the distance between print position and current position is: (nL+nH*256)* (horizontal or vertical minimal unit).nL, nH=0~255. Horizontal or vertical minimal unit is specified by GS P command. ESC a n Select alignment mode Format:...
  • Page 76 TP860 User's Manual Printer generates pulse, whose width specified by t1 and t2. High is t1*2ms, low is t2*2ms. m=0, 48, 1, 49. ESC t Select code page Format: ASCII: Decimal: Hex: Description: n=0 PC437 n=1 PC932(katakana) n=2 PC850 n=3 PC860(Portuguese) n=4 PC863(Canadian) n=5 PC865(Nordic) n=6 (West Europe)
  • Page 77 TP860 User's Manual Not defined Not defined Underline is not selected Underline is selected FS & Enter Chinese mode Format: ASCI: & Decimal: Hex: Description: Enter the Chinese mode. FS - Turn Chinese character underline mode on /off Format: ASCII: Decimal: Hex: Description:...
  • Page 78 TP860 User's Manual 0≤n≤255 When the last bit of n is 0, turn off the quadruple-size mode. When the last bit of n is 1, turn on the quadruple-size mode. FS p n m Print NV bit image Format: ASCII: Decimal: Hex: Description:...
  • Page 79 TP860 User's Manual GS * Define downloaded bit image Format: ASCII: d1…dk Decimal: d1…dk Hex: d1…dk Description: Define the downloaded bit image. n1=1~48. n2=1~255. n1×n2<1200, k=n1×n2×8. d is the bit image data. n1×8 dots in the horizontal direction and n2×8 dots in the vertical direction. The downloaded bit image is valid till it is redefined or printer is restarted.
  • Page 80 TP860 User's Manual GS H Enable/disable the printer to print HRI character Format: ASCII: Decimal: Hex: Description: n=0, 48: no HRI printing. n=1, 49: printing HRI character above the bar code. n=2, 50: printing HRI character above the bar code. n=3, 51: printing HRI character above and below the bar code.
  • Page 81 TP860 User's Manual Select the HRI character when printing a bar code, n=0, 48; Select character A (12*24) n=1, 49; Select character B (8*16) GS h Set bar code height Format: ASCII: Decimal: Hex: Description: Set the height of the bar code to n dots. n=0~255.

  • Page 82: Star Line Mode Printing Commands

    TP860 User's Manual /, : NUL ～ SP CODE128 Can be changed 2≤n<255 0≤d≤127 (7FH) GS v 0 Print raster bit image Format: ASCII: d1…dk Decimal: d1…dk Hex: d1…dk Description: Print a raster bit image according to the numerical value of m. m=0, 48: normal printing;...
  • Page 83 TP860 User's Manual Code Page Code Page PC437 Thai (KU42) PC437 (USA, Std. Europe) WPC 1252 (Windows Latin-1) Katakana WPC 1250 (Windows Latin-2) PC437 (USA, Std. Europe) WPC 1251 (Windows Cyrillic) PC858 (Multilingual) PC 3840 (IBM-Russian) PC 852 (Latin-2) PC 3841 (Gost) PC 860 (Portuguese) PC 3843 (Polish) PC 861 (Icelandic)
  • Page 84 TP860 User's Manual ESC / n Specify/cancel slash zero Format: ASCII: Decimal: Hex: Description: n=0, 1, 48, 49 Specifies and cancels slash zeros. Function 0, 48 Cancels slash zero 1, 49 Specifies slash zero ESC SP n Set ANK right space Format: ASCII: ESC SP n...
  • Page 85 TP860 User's Manual ESC i n1 n2 Set/cancel the double wide/high Format: ASCII: ESC i n1 n2 Decimal: 105 n1 n2 Hex: n1 n2 Description: 0≤n1≤5 48≤n1≤53 (“0”≤n1≤“5”) 0≤n2≤5 48≤n2≤53 (“0”≤n2≤“5”) Specifies/cancels double high/wide for characters. This command is ignored if either n1 or n2 is outside of the defined area. Expanded high Expanded wide 0, 48...
  • Page 86 TP860 User's Manual 3, 51 Specifies 4x high expansion 4, 52 Specifies 5x high expansion 5, 53 Specifies 6x high expansion Set double wide Format: ASCII: Decimal: Hex: Description: Specifies double wide for characters. Cancel expanded wide Format: ASCII: Decimal: Hex: Description: Cancels expanded wide.
  • Page 87 TP860 User's Manual ESC – n Select/cancels underling mode Format: ASCII: Decimal: Hex: Description: n=0, 1, 48, 49 Specifies underlining (2 dots). Underline 0, 48 Cancels underline 1, 49 Specifies underline ESC _ n Specify/cancel upperline Format: ASCII: ESC _ Decimal: 95 n Hex:...
  • Page 88 TP860 User's Manual Line feed Format: ASCII: Decimal: Hex: Description: Feeds the currently specified amount of paper. If print data exists in the line buffer, it prints that data. Carriage return (line feed) Format: ASCII: Decimal: Hex: Description: When the CR code is enabled, the CR code functions in the same way as the LF code. ESC a n Feed paper n lines Format:...
  • Page 89 TP860 User's Manual ESC I n n/8mm line feed Format: ASCII: ESC I Decimal: 73 n Hex: 49 n Description: 1≤n≤255 Executes a n/8mm paper feed. If print data exists in the line buffer, it prints that data. ESC GS P 0 Selects page mode Format: ASCII:...
  • Page 90 TP860 User's Manual Feed paper to vertical tab position Format: ASCII: Decimal: Hex: Description: Feeds paper to the next vertical tab position. ESC B n1 n2…nk NUL Set vertical tab position Format: ASCII: ESC B n1 n2 ... nk NUL Decimal: 66 n1 n2 ...
  • Page 91 TP860 User's Manual Move horizontal ta Format: ASCII: Decimal: Hex: Description: Move print position to next horizontal tab position. ESC D n1 n2…nk NUL Set horizontal tab Format: ASCII: ESC D n1 n2 ... nk NUL Decimal: 68 n1 n2 ... nk 0 Hex: 44 n1 n2 ...
  • Page 92 TP860 User's Manual Position alignment 0, 48 Left alignment 1, 49 Center alignment 2, 50 Right alignment ESC & c1 c2 n d1…d48 Register 12 x 24 dot font download characters Format: ASCII: ESC & c1 c2 n d1 ... d48 Decimal: 38 c1 c2 n d1 ...
  • Page 93 TP860 User's Manual c2=0, 48 32≤n≤127 Deletes 12 x 24 dot font download characters registered to the nth address. ESC % n Specifies/cancels ANK download characters Format: ASCII: ESC % n Decimal: 37 n Hex: 25 n Description: n=0, 1, 48, 49 Specifies/cancels ANK download characters Download characters 0, 48...
  • Page 94 TP860 User's Manual 0≤d≤255 Prints bit images using 1 dot wide and 3 dots high per 1 dot of input data. ESC k n1 n2 d1...dk Fine density bit image Format: ASCII: ESC k n1 n2 d1 ... dk Decimal: 107 n1 n2 d1 ...
  • Page 95 TP860 User's Manual b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 b7 b6 b5 b4 b3 b2 b1 b0 ESC FS q n [x11 x12 y11 y12 d1...dk]1...[xn1 xn2 yn1 yn2 d1...dk]n Register logo Format: ASCII: ESC FS q n [x11 x12 y11 y12 d1 ...
  • Page 96 TP860 User's Manual Relationships of logo and registered data xn=xn1+xn2×256, yn=yn1+yn2×256 {(xn1+xn2×256)×8} dots Dots d[11] d[21] d[n1] (yn1+yn2×256 bytes d[12] d[22] d[n2] (yn1+ yn2×256×8 dots d[x1] d[x2] d[xn] ESC FS p n m Print logo Format: ASCII: ESC FS p Decimal: 27 28 112 n m Hex: 1B...
  • Page 97 TP860 User's Manual 2, 50 Double high mode 3, 51 Double high/wide mode ESC b n1 n2 n3 n4 d1...dk RS Print bar code Format: ASCII: ESC b n1 n2 n3 n4 d1 ... dk RS Decimal: 27 98 n1 n2 n3 n4 d1 ... dk 30 Hex: 1B 62 n1 n2 n3 n4 d1 ...
  • Page 98 TP860 User's Manual Paper is fed to cutting position, then a partial cut. 3, 51 Print data in line buffer is printed before the operation described above. This command is ignored if the printer is not equipped with an auto-cutter. ESC BEL n1 n2 Set external drive device 1 pulse width Format:...
  • Page 99 TP860 User's Manual ESC GS BEL m t1 t2 Ring buzzer Format: ASCII: ESC GS BEL m t1 t2 Decimal: 27 m t1 t2 Hex: 1B m t1 t2 Description: 1≤m≤2, 49≤m≤50 (“1”≤m≤“2”) 1≤t1≤255 1≤t2≤255 Rings the buzzer. m specifies the drive terminal of the buzzer. Buzzer Drive Terminal 1, 49 Buzzer Drive Terminal 1...
  • Page 100 TP860 User's Manual ESC RS d n Set print density Format: ASCII: ESC RS d Decimal: 27 30 100 n Hex: 1B 64 n Description: 0≤n≤6 48≤n≤57 (“0”≤n≤“6”) Sets print density. Print density 0, 48 Print density 1.3 1, 49 Print density 1.2 2, 50 Print density 1.1...
  • Page 101 TP860 User's Manual ESC ACK SOH Real-time printer status (ASB status) Format: ASCII: ESC ACK SOH Decimal: 27 Hex: 1B Description: Sends ASB status information to the host. This command is not used when ASB is valid. Real-time printer status (1) Format: ASCII: ENQ Decimal: 5...
  • Page 102 TP860 User's Manual Update ASB ETB status Format: ASCII: ETB Decimal: 23 Hex: 17 Description: Sets the ASB ETB status when reading this command from the reception buffer, then sends ASB. ESC RS E n Initialize ASB ETB counter and ETB status Format: ASCII: ESC RS E n Decimal: 27...
  • Page 103 TP860 User's Manual 65≤n2≤70 (“A”≤n2≤“F”) Adds n1 dots left space amount and n2 dots right space amount to Chinese characters. ESC t n1 n2 Set 1 byte Chinese character left/right spaces Format: ASCII: ESC t n1 n2 Decimal: 27 116 n1 n2 Hex: 1B 74 n1 n2 Description:...
  • Page 104 TP860 User's Manual ESC @ Command initialization Format: ASCII: ESC @ Decimal: 27 Hex: 1B Description: Initializes each command after printing data in the line buffer. ESC ? LF NUL Reset printer (execute self print) Format: ASCII: ESC ? LF NUL Decimal: 27 63 10 0 Hex: 1B...

  • Page 105: Chapter 8 Command List

    TP860 User's Manual Chapter 8 Command List 8.1 ESC/POS Command List Control command Description Beep once Horizontal tab Print and line feed Print and Feed paper to the next black mark position DLE EOT Status transmission ESC BEL Beep for appointment ESC SP Set right-side character spacing ESC !

  • Page 106: Star Line Mode Command List

    TP860 User's Manual FS - Turn Chinese character underline on /off FS . Exit Chinese mode FS 2 User-defined Chinese characters FS S Set Chinese character spacing FS W Turn quadruple-size mode on/off for Chinese character FS p n m Print NV bit image FS q n Define the NV bit image...
  • Page 107 TP860 User's Manual ESC F (1B 46) Cancel emphasized printing ESC - (1B 2D n) Select/cancels underline mode ESC _ (1B 5F n) Specify/cancel upperline ESC 4 (1B 34) Select white/black inverted printing ESC 5 (1B 35) Cancel white/black inversion SI (0F) Select upside-down printing DC2 (12)
  • Page 108 TP860 User's Manual settings ESC GS EM DC2 (1B 1D 19 12 m n1 n2) External buzzer drive execution ESC RS d (1B 1E 64 n) Set print density ESC RS r (1B 1E 72 n) Set print speed ESC RS a (1B 1E 61 n) Set status transmission conditions ESC ACK SOH (1B 06 01) Real-time printer status (ASB status)

This manual is also suitable for:

Tp860Tp860uTp860usTp860ueTp860useTp860ub ... Show all

Table of Contents