Assa Abloy Norton Wave to Open 704 Installation Instructions page 4

Operation
Two Modes:
Standby (default LED Red)
Operating (default LED flashing Green)
To operate switch, make a slow waving
motion with hand in front of plate within
4" (101mm).
When hand movement is detected or
backup button is pressed, a tone will
sound and LED circle will flash to indicate
relay has been activated. (Fig 6)
Relay will activate for amount of time as
set by time delay jumpers. Backup button
can be used to activate relay at any time.
(Fig 6)
Norton Technical Product Support:
Monroe, NC 28112 USA
Phone: 800.438.1951 ext: 6030
TechSupport.Norton@assaabloy.com
nortondoorcontrols.com
Norton is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.
Copyright © 2020, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
Approved 2020-07-09
Figure 6
LED
Backup
Button
80-9370-0002-020 Rev 2 07/20