The remote control transmitter does
The sound is degraded when
listening with headphones to a
CD player or tape deck that is
connected to this unit.
Direct sunlight or lighting (of an inverter
type of fluorescent lamp etc.) is striking
the remote control sensor of the main
The manufacturer's code is not set
The proper manufacturer's code for the
component to be controlled is not set.
The component to be controlled is not
This unit is in the standby mode.
Change the position of the main unit.
Set the code again.
Try entering another code for the same
Set the SELECTOR DIAL to the proper
Turn the power of the unit on.
3/25/99, 3:55 PM