REMOTE CONTROL TRANSMITTER
You can use this remote control transmitter to control not only this unit but also other components connected to it. This is factory
set to control this unit and most YAMAHA audio components. To control other brands of components, you must preset the remote
control transmitter with the manufacturer's codes listed on pages 311 to 322.
Components which can be controlled
There are nine positions that you can select to control connected components with this remote control transmitter. When turning
the SELECTOR DIAL, the position changes as follows:
You can perform basic operations
of this unit and control a YAMAHA
tuner with the SELECTOR DIAL
set to this position.
A television can be
A cable television or
DBS tuner can be
A VCR can be controlled.
The shaded positions in the diagram above indicate that you can preset the code for the manufacturer of your component.
Note that you can preset only one code for one position. For details, see "SETUP CODES" on page 42.
The DVD/LD and DVD MENU positions
• Be sure that the SELECTOR DIAL is set to the DVD/LD position when presetting the code for a DVD or an LD player. The
code that you preset to the DVD/LD position is also preset to the DVD MENU position simultaneously. You cannot preset the
code for a DVD player when the SELECTOR DIAL is set to the DVD MENU position.
• DVD MENU operations cannot be performed for some DVD players.
When using a second (and third) VCR (For details, see "To use a second (and third) VCR" on page 42.)
• If you are not using a CBL/DBS (cable TV or DBS tuner), the second (or third) VCR can be preset using the CBL/DBS
• If you are not using a DVD player, the second (or third) VCR can be preset using the DVD MENU position. Note that in this
case you must preset a code for an LD player to the DVD/LD position even if an LD player is not used.
Select the component that you want to control by turning
the SELECTOR DIAL.
Note: Turn the SELECTOR DIAL until it stops with a click.
The component name is
displayed in this window.
The code for a YAMAHA tape deck is preset.
(Be sure to preset the proper code when operating a YAMAHA
The code for a YAMAHA CD player is preset.
This unit can be controlled and DSP programs can be selected
DVD/LD & DVD MENU:
An LD player can be controlled using the DVD/LD position.
A DVD player can be controlled using the DVD/LD and DVD
MENU position. When using the YAMAHA DVD player
(DVD-1000 or DVD-S700), be sure to preset the code number
Press the desired operation button.
Note: Press the button with the remote control transmitter
aimed at the front panel.
The indicator will flash when the button
3/25/99, 3:54 PM