CONTROLS AND THEIR FUNCTIONS
Press this switch to turn the power of this unit on. Press it
again to turn this unit into the standby mode.
In this state, this unit consumes a very small quantity of
power to receive infrared-signals from the remote control
Remote control sensor
Receives signals from the remote control transmitter.
Shows various information. (For details, refer to page 9.)
TAPE/MD MON / EXT. DECODER
Press this button to play a tape or an MD. The "TAPE/MD
MON" indicator lights up on the display.
When you press the button next, the "TAPE/MD MON" indicator
goes off and "EXT. DECDR" appears on the display and you
can play the signal connected to the EXTERNAL DECODER
Turn this selector to select the program source (VCR, VIDEO
AUX, TV/DBS, DVD/LD, CD, TUNER, PHONO) to listen to or
The name of the selected program source appears on the
This control is used to raise or lower the volume level.
When you use headphones, connect the headphones to the
PHONES jack. You can listen to the sound to be output from
the main speakers through headphones.
When using headphones only, set both SPEAKERS A and B to
the OFF position and switch off the digital sound field processor
(so that no DSP program name appears on the display) by
3/25/99, 3:53 PM