Table of Contents
Advertisement
ONLINE ELECTRONICS LTD
1. GENERAL DESCRIPTION
The ID5001P (Passive) pig signaller is a fully ATEX and IECEx certified, Exd flameproof, non-
intrusive, pig signaller which detects, signals, and logs the passage of pigs at critical points along
a pipeline both on land and offshore.
The unit uses Passive (listening) techniques to detect pig passage events. Events are signalled
as they occur via a 3" graphical LCD display and high brightness LEDs positioned above and
below the display. Events can also be signalled remotely using several optional outputs.
The unit logs the time and date of up to 99 events which can be viewed at any point using the
local display. The user can turn the unit ON and OFF as well as modify several settings using a
single control button and intuitive menu system.
The unit has two basic parts as shown below. The sensor is permanently connected to the main
housing via a cable and can be quickly and easily attached to the pipeline using ratchet straps
or steel banding. The main housing contains all electronics, batteries (if fitted), display and the
control button and can be mounted onto the pipeline using a mounting plate and straps in a
similar fashion to the sensor or mounted on a wall or post.
ID5001P_5001_B00
Page 3 of 36
Advertisement
Table of Contents
