Table of Contents
Advertisement
ONLINE ELECTRONICS LTD
5.5. SUNSHADE POST MOUNTING
If the main housing is exposed to direct sunshine,
then it is recommended that a sunshade is installed
to prevent unnecessary heating of the unit which may
shorten the lifespan of the equipment.
Secure the post mount sunshade to the post as
shown using the supplied M8 U-bolt / post / clamp /
sunshade / 2x M8 washers / 2x M8 nuts.
5.6. SUNSHADE PIPELINE MOUNTING
If the main housing is exposed to direct sunshine, then it is recommended that a sunshade is
installed to prevent unnecessary heating of the unit which may shorten the lifespan of the
equipment.
The pipeline mounted sunshade is fixed to the same mounting plate as the main unit using 2x
'C' brackets as shown. This assembly is then mounted onto the pipeline as described in section
5.3 MAIN HOUSING PIPELINE MOUNTING.
Secure 2x pipeline mount sunshade brackets to the mounting
plate using 4x M8x20 hexbolts / 2x 'C' brackets / mounting
plate / 4x M8 nuts.
Secure the sunshade to the 2x brackets using 4x M8x20
hexbolts / 4x M8 washers / sunshade / 2x 'C' brackets / 4x
M8 nuts.
ID5001P_5001_B00
Page 20 of 36
Advertisement
Table of Contents
