Pump Matrix - Graco Husky Sanitary Series Instructions-Parts List Manual

Pump Matrix

Husky 3150 Stainless Steel Sanitary Pumps
Your Model No. is marked on the pump's serial plate. To
determine the Model No. of your pump from the follow-
ing matrix, select the six digits which describe your
pump, working from left to right. The first digit is always
S, designating Husky Sanitary diaphragm pumps. The
remaining five digits define the pump configuration, size,
and materials of construction. For example, a sanitary
Pump Configura-
Sanitary
tion
Pump
A 3A Approved
S - (for all pumps)
B Ball Check
F Flapper Check
310622C
ball check pump with a 3 in. inlet and outlet, Santoprene
balls and diaphragms, a pump stand, and no leak detec-
tor is model
refer to the part lists on page 28. The digits in the matrix
do not correspond to the reference numbers in the parts
drawing and lists.
Inlet and Outlet - Diaphragm
1 1 1/2 x 1 1/2 A 3A Approved
-
in.
2 2 x 2 in. 1 PTFE
-
3 3 x 3 in. 6 Santoprene®
-
4 4 x 4 in. 7 Buna-N
-
5 3 x 2 in. 8 Viton®
-
SB3661.
To order replacement parts,
Check Valve
Material
A 3A Approved
(Buna-N) (Buna-N)
1 PTFE
6 Santoprene®
7 Buna-N
8 Viton®
F Flapper
Pump Matrix
Leak Detector,
Pump Stand
A Leak Detec-
tor and Pump
Stand
1 Pump Stand
3 None
27