Husky 515 And Husky 716 Pump Matrix - Graco D51 Instructions Manual

Husky 515 and Husky 716 Pump Matrix

Your Model No. is marked on the pump's serial plate. To determine a pump Model No. from the following matrix,
select the six digits that describe the pump, working from left to right. The first digit is always D, designating Husky
diaphragm pumps. The remaining five digits define the air motor type and the materials of construction. For exam-
ple, a pump with a standard air motor, acetal fluid section, acetal seats, PTFE balls, and PTFE diaphragms is Model
D 5 1 2 1 1. The same model with EN 10204 Type 3.1 certification would be D51211C31.
Column1 Column 2
Diaphragm Air Motor
Pump
D (for all 4 (Husky 515/716;
pumps) remote-operated)
5 (Husky 515/716;
standard)
9 (Husky 515/716;
cycle count)
Column 3 Column 4
Fluid Section Guides
1 (acetal) Husky 2 (acetal)
515, NPT
2 (polypropylene) 3 (316 sst)
Husky 515, NPT
3 (aluminum) Husky 9
716, NPT (polypropylene)
4 (Stainless Steel) A (PVDF)
Husky 716, NPT
5 (PVDF) Husky D (duckbill)
515, NPT
A (acetal) Husky
515, BSPT
B (polypropylene)
Husky 515, BSPT
C (aluminum)
Husky 716, BSPT
D (stainless steel)
Husky 716, BSPT
E (PVDF) Husky
515, BSPT
Column 5 Column 6
Balls Diaphragms
1 (PTFE) 1 (PTFE)
3 (316 sst)
5 (TPE) 5 (TPE)
®
6 (Santoprene ) 6 (Santoprene
7 (buna-N) 7 (buna-N)
8 8
(fluoroelastomer) (fluoroelastomer)
Option
EN 10204 Type
C31 (Type 3.1)
C31A (Type 3.1
Adv.)
C32 (Type 3.2)
®
)
308981 23