1. Precaution Electrical Safety Confirm country and local electrical safety standard when using or installing the product. The product itself has no power switch. Please stop power supply or plug out power socket when it is not in good working. Video wire and control wire should be insulated and individual connected, can’t mix-up with other wires.
2.2 Product Feature 1/2.8 inch high quality CMOS sensor, can reach maximum 1920 x 1080 r s and output frame rate up to 60fps. Up to 20x Optical Zoom with wide horizontal of view 72° The camera with advanced video image processing technology & full HD 1/2.8" CMOS Sensor, 10x/20x Op cal Zoom, max r to 1920*1080P@60fps.
Function ② After pressing, the camera ① Power Key ③ enters standby mode After pressing, the camera ④ P/T RST Key enters self-check Flip Key ⑤ ⑥ Camera Select the camera to be Select Key controlled ⑦ BLC Key Menu Key Enter/Exist Menu Press HOME button, the Camera PTZ...
4. Operation Instructions 4.1 Camera ID Select Select the target camera ID (from No.1 to No.4) 4.2 Pan/Tilt Control Turn camera lens up Turn camera lens down Turn camera lens right 4.3 Menu Display Click the [MENU] button to display the on-screen menu.
4.4 Focus [AUTO] Enable camera to automatically focus [MANUAL] Switch to manual control mode [FAR] Manually focus on a distant object [NEAR] Manually focus on a nearby object 4.5 Back Light Compensation Strong background light can create unwanted shadows. Press [BLC] to activate backlight compensation mode.
4.7 Presets Setting & Call and Reset 1. To save a preset, press [PRESET] then press any of the numbers (no. 1–9). You can save up to 9 presets. 2. To call a preset, press the saved preset number (no. 1–9). 3.
5. Menu Setting MAIN MENU EXPOSURE 1. Operate remote controller, press the [MENU] button COLOR to display the OSD menu. PICTURE P/T/Z 2. Press the arrow keys to select the menu, press left and NOISE REDUCE right button to set the camera. VIDEO OUT SYSTEM SETUP DEFAULT SETUP...
5.2 COLOR Press the [MENU] button to display the OSD menu, press arrow keys to move to COLOR and then press right button to enter sub menu, as the right picture. COLOR WB MODE: AUTO [WB MODE]: AUTO/ONE-SHOT/ATW/ MUNUAL/3000K/4000K/ R TUNING: 5000K/6500K B TUNING: [R TUNING]: 0-32...
5.4 P/T/Z Press the [MENU] button to display the OSD P / T / Z menu, press the arrow keys to move to [P/T/ Z], press right button to the sub menu, as the FLIP: L/R DIRECTION: right picture shown. AF MODE: AUTO [FILP]: ON/OFF...
VIDEO OUT 5.6 Video Format VIDEO OUT: 720P50 Press the [MENU] button to display the 720P60 OSD menu, press the arrow keys to move to 1080I25 [VIDEOOUT], press right button to the sub 1080I30 menu, as the right picture shown. 1080I50 1080I59.94 [VIDEO OUT] : 2160P30/25;1080P60/59.9...
6. Network Connecting 6.1 Mode of Connecting Direct Mode: Connect camera with computer through network cable directly. LAN Connecting Mode: Camera could connect to the Internet by router or interchanger then users could log in through browser. Note: Don’t put the wires and cables at somewhere easily touched by people for fear that the quality of imaging is affected by unstable signaltransmission which is caused by line contact problem.
Page 18
After products finished self-checking, it could follow the steps as above to check if the network works. For example, open DOS commend window and input ping 192.168.1.176 and press the ENTER button. If it comes up with information as below picture, it means network working.
6.2 CGI /APK login 6.2.1 CGI /APK Login Open the client software (before turning on the client software, first turn off the anti-virus software such as 360, avoid being mistaken for viruses and be prohibited from running by 360). By default, admin login with user name and password can preview, record, screenshot, PTZ control, audio and video.
Page 20
6.2.2.3 Search Device Click“Search Device” Button ,Refresh the online camera, the online camera is displayed as a list. On the left side of the window, double-click a camera to operate the camera. 6.2.2.4 Play Video Streaming by RTSP Click“PLAY” Button, The Current RTSP Streaming will be Play( Default was Automatically Real-time Play).
Page 21
6.2.2.11 RTSP Video Streaming Enter the RTSP stream address of the current camera in the display window; Note: You can also enter others RTSP addresses into the input box and click to play the RTSP video stream. 6.2.2.12 Pan, Tilt, Zoom In/Out Control The PTZ control is as shown in the figure below.
Page 22
6.2.2.13.1 Brightness Adjustment Click or drag the brightness control slider to change the brightness of the camera, and the label on the right will display the value of the brightness.The range of brightness varies (0-14). 6.2.2.13.2 Contrast Adjustment Click or drag the Contrast control slider to change the contrast of the camera, and the label on the right will display the value of the contrast.The range of brightness varies (0-14).
Page 23
6.2.2.13.11 Video Style To Select different video styles through the drop-down menu, video style: standard, Bright, RTSP, Soft styles. 6.2.2.13.12 Mirror Click left of the mirror button to turn on the mirror function ,Click again to turn off the mirror function 6.2.2.13.13 FLIP Click left of the Flip button to turn on the flip function ,Click again to turn off the...
Page 24
6.2.2.14.1 Main Streaming a.Streaming Frame Rate: Input 1-30 to setting Streaming Framer rate , default 30. b.GOP : Input 1-60 to setting valued of Frame Interval , default 30. c.Bit Rate:Input 1-10240to Setting Video Bite Rate , default 4096. d.Resolution:Through drop-down menu to selection Resolution, default 1920. e.Streaming Type:Through drop-down menu to selection Video Stream or Complex Stream, default Complex Streaming.
Page 25
6.2.2.14.2 Sub-Streaming a. Streaming Frame Rate: Input 1-30 to setting Streaming Framer rate , default 30. b.GOP:Input 1-60 to setting valued of Frame Interval , default 30. c.Bit Rate:Input 1-10240 to Setting Video Bite Rate , default 4096. d. Resolution:Through drop-down menu to selection Resolution, default 1920. e.Streaming Type:Through drop-down menu to selection Video Stream or Complex Stream, default Complex Streaming.
Page 26
6.2.2.15 Internet Setting The network configuration is as shown in the figure below. Double-click the camera in the list to view the network setting & Information of the current camera. 6.2.2.15.1 IP,DNS Config a. IP Config Supports automatic IP address and manual configuration of IP.
Page 27
g. Presets Freeze:OFF,ON h. Saved & Restore Default Click“Save”Button to saved the PTZ Parameters of Current Camera. Click“default”Button to Restore PTZ Parameters of Current Camera. 6.2.2.15.4 RTSP Streaming address Default Main Streaming:rtsp://192.168.50.190:554/0/0/0 Default Sub-Streaming:rtsp://192.168.50.190:554/0/0/1 a.RTMP Auth: Through the drop-down menu to Selection“OFF”“ON”RTMP function. b.Stream type: Through the drop-down menu“Main Stream”, “Second Stream”.
Page 28
6.2.2.16.1 Reset Restart a. Click “Restart”Button to Restart Camera. b. Click“Restore setting”Button to restore default parameters. c.Firmware Upgrade:Click the "Browse" button to load the upgrade file and click "Upgrade" to Start upgrade the current camera. The upgrade progress bar shows the current upgrade status, showing 100%, indicating that the upgrade is complete.
7. Installation Instruction Pendent : 1. Twist a pair of PM3 * 8 screws on each side of the bracket (keep half out hooking). 2. using one of the brackets to the ceiling with four expansion screws (STP4 * 16) (as like picture A).
8. Warranty BZBGEAR wants to assure you peace of mind. All BZBGEAR cameras and camera-related products include our Stress-Free Three-Year Warranty. For complete warranty information, please visit BZBGEAR.com/warranty. For questions, please call 1.888.499.9906 or email support@bzbgear.com. 9. Mission Statement BZBGEAR manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind.