Installing The Wire Guide For Standard And Hollow Wrist Arm; Installing The Neck Liner - ESAB RT KS-2 Instruction Manual

5 INSTALLATION
3. The correct seating of the torch can be checked by means of the window (1). If the
torch has been correctly mounted, no gap should be seen through the window (1).
5.6

Installing the wire guide for standard and hollow Wrist arm

Installing the wire guide
Choose the wire guide or liner depending on the filler wire material and diameter to be used,
see the spare parts list. Accurate performance of the system can only be guaranteed when
using original ESAB wire guides.
The recommended wire guide is the split wire guide, which consists of the neck liner and a
separate guide in the cable assembly. The front part of the wire guide, which is most
stressed, can be exchanged easily and independently of the cable assembly wire guide.
For correct installation, the following steps must be followed (example for Euro central
connector).
5.6.1

Installing the neck liner

The neck liner must be selected to fit the material and diameter of the welding wire, see the
spare parts list.
0463 373 101 - 50 - © ESAB AB 2018