Rt Flc-2 Installation; Rt Flc-2 Mount; Rt Flc-2 Wire Feeder Connection; Feeding Through The Robot Arm - ESAB RT KS-2 Instruction Manual

5 INSTALLATION
5.4 RT FLC-2 installation
5.4.1 RT FLC-2 mount
1. Remove the three M5 screws (2) from the front cover (3) of the RT FLC-2 torch mount
and carefully pull the cover off the main body (4).
1 - Hexagon wrench 4 mm
2 - 3× M5×12 screws
2. Now position the RT FLC-2 main body (4) on the adapter flange (6) so that the index
pin is correctly seated. Attach with the screws (5) enclosed
Fastening torque max. 2.2 Nm (19.5 in. lb).
1 - Hexagon wrench 4 mm
4 - RT FLC-2 main body
5.4.2 RT FLC-2 wire feeder connection
5.4.2.1

Feeding through the robot arm

NOTĂ!
In order to adjust the wire feeder position to the cable assembly length, it must be
mounted on an adjustable support with a possible movement of ± 2-3 cm (± 1 in.) to
the back and to the front. The length of the cable assembly must be determined
from the centred mounting position of the wire feeder.
0463 373 101
3 - RT FLC-2 front cover
4 - RT FLC-2 main body
5 - 3× M5×12 hexagon socket screws
6 - Adapter flange
- 41 - © ESAB AB 2018