GCC Technologies LaserPro Venus II User Manual page 64

Set Command Mode Page
The Set Command Mode Page allows you to configure vector settings when outputting in Default
or HPGL mode. Default mode is the standard Windows print driver recognized by the most
popular graphic software programs such as CorelDraw, Photoshop, Illustrator, etc. Whereas,
HPGL mode is a less common output format generated from some RIP applications (signage
industry). Regardless of which format you will be working with, both output formats are supported.
 Mode: Default / HPGL
 Vector Pen: 1 - 16
 Vector Speed: 0.0% - 100%
 Vector PPI: 0.0% - 100%
 Power Ramp: YES / NO
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
 /  Directional
Start / Stop
Auto Focus
▲ / ▼ Manual Focus
Buttons
Set Command Mode Page
Back to previous page
Save your current settings
Scroll through the menu selections
Adjust the value for that selection
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
☼ Navigating to this page:
Main Work Page
Functions Page
Machine Setting Page
Set Command Mode
Page
Function
- 64 -
Press F4
Select <Machine Setting>
from the menu
Select <Set Command
Mode >
from the menu
232001280G(13)