Networking Connectivity Setup - GCC Technologies LaserPro Venus II User Manual

3.1.3.1 Networking Connectivity Setup

GCC laser engraver is built-in with LAN port to enable multiple laser engravers to be
operated by one PC and multiple PCs to share a single unit of laser engraver. Follow
the setup instructions below. Here use LaserPro Spirit GLS laser system as illustration.
Step 1. Connect LAN cable to the LAN port of GCC laser engravers and turn on
machine
Step 2. Navigate the control panel through <F4> Function <Machine Setting>
<LAN Setup Wizard> IP Address.
Step 3. Go to Windows <Control Panel> <Hardware and Sound> <Printer>, and
right click on VENUS printer to check printer properties.
Step 4. Go to <Ports> tab of VENUS printer properties, and select <Add Port>, and
follow the instruction to enter the TCP/IP information received from laser machine
control panel in step 2.
- 16 - 232001280G(13)