GCC Technologies LaserPro Venus II User Manual page 57

Set Lens Page
The Set Lens Page allows you to modify the lens setting after you have changed to a different
focal lens. Remember to save your settings after you have made the proper changes. Now by
pressing the Auto Focus button, the LaserPro VENUS will auto focus properly using the new lens
setting. The LaserPro VENUS's default setting is <2.0">
 Lens: 2.0" / 4.0"
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
Start / Stop
Auto Focus
▲ / ▼ Manual Focus
Buttons
☼ Navigating to this page:
Set Lens Page
Back to previous page
Save your current settings
Cycle through selections
Back to Main Work Page
Initiate the auto focus function
Manually adjust the height of the work table (Z-
axis)
- 57 -
Main Work Page
Press F4
Functions Page
Select <Machine Setting>
from the menu
Machine Setting Page
Select <Set Lens>
from the menu
Set Lens Page
Function
232001280G(13)