GCC Technologies LaserPro Venus II User Manual page 61

Set Vector Mode Page
The Set Vector Mode Page allows you to adjust and balance vector mode's quality and
speed settings based on your specific job. Speedy Vector Mode offers the highest output
speed, sacrificing quality. Whereas Quality Vector Mode offers the highest quality, sacrificing
output speed. Keep in mind that speed and quality are usually at a tradeoff. The system's
default is Fine Vector mode, sacrificing some speed for higher quality.

Modes: Quality, Production, Speedy
(Slower speeds / higher quality ---------- Faster speeds / lower quality)
Relevant Buttons
F1 (Back)
F4 (Save)
 /  Directional
Start / Stop
Set Vector Mode Page
Back to previous page
Save your current settings
Cycle Set Vector Mode between QUALITY
VECTOR / FINE VECTOR / COARSE VECTOR /
SPEEDY VECTOR
Back to Main Work Page
☼ Navigating to this page:
Main Work Page
Functions Page
Machine Setting Page
Vector Mode Page
Function
- 61 -
Press F4
Select <Machine Setting>
from the menu
Select <Vector Mode> from
the menu
232001280G(13)